| 
26 | KDV-415U/ KDV-MP5042UAudio ControlYou can adjust following Audio Control items ;Adjustment Item Display RangeRear volume “R-VOL” 0 — 35AV output volume “AVVOL” 0 — 35Subwoofer level “SW L” –15 — +15Balance “BAL” Left 15 — Right 15Fader “FAD” Rear 15 — Front 15Exit Audio Control mode (Volume control mode)1 Select the source to adjustPress the [SRC] button.2 Enter Audio Control modePress the [AUD] knob.3 Select the Audio item to adjustPress the [AUD] knob.4 Adjust the Audio itemTurn the [AUD] knob.5 Exit Audio Control modePress any button.Press a button other than the [AUD] knob or [0]button.Audio Adjustments• AV output sourceThe sub source (DVD, USB, and AV IN) can be output tothe AV output separately from the main source.- Set the preout to “AV” in “MENU” > “SWPRE” (page 11) of.- Adjust the volume of AV output source by Control> (page 26).- “USB” and “DVD” cannot be set at the same time for themain and AV output sources.• Dual Zone System and the AV output source cannotbe used at the same time. Turn off the setting currentlyused and then set the next function.1 Select the source to adjustPress the [SRC] button.2 Enter Audio Setup modePress the [AUD] knob for at least 1 second.3 Select the Audio Setup item to adjustPress the [AUD] knob.4 Adjust the Audio setup itemTurn the [AUD] knob.5 Exit Audio Setup modePress the [AUD] knob for at least 1 second.Audio SetupYou can set Sound system, such as follows;Adjustment Item Display RangeVolume offset “V-OFF” –8 — ±0 (AV IN: -8— +8)Dual Zone System “2ZON” OFF/ DVD/ USB/ AV INAV output source “AV/O” OFF/ DVD/ USB/ AV IN⁄• Volume offset: Sets each source’s volume as a differencefrom the basic volume.• Dual Zone SystemMain source and sub source (DVD, USB, AV IN) outputFront channel and Rear channel separately.- Set the preout to “R” or “SW” in “MENU” > “SWPRE” (page11) of .- Set up the channel of sub source by “ZONE2” of (page 11).- Select Main source by [SRC] button.- Adjust the volume of Front channel by [AUD] knob.- Adjust the volume of Rear channel by Control> (page 26) or [5]/[∞] button on the remotecontrol (page 32).- The Audio Control has no effect on sub source.- “USB” and “DVD” cannot be set at the same time for themain and sub sources.Preset Equalizer SelectYou can select following Equalizer curve;Preset Equalizer DisplayUser* “USER”Rock “ROCK”Pops “POPS”Easy “EASY”Top 40 “TOP40”Preset Equalizer DisplayJazz “JAZZ”Game “GAME”iPod (During iPodsource only)“iPod”Natural “NATURAL”* The Equalizer curve set in the section Control> is recalled.1 Enter Preset Equalizer modePress [ ] 1 sec., and select “DSP” > “CONTROL” >“EQ” > “PRESET”.Press the [AUD] knob.• For how to select Function Control items, refer to (page 10).2 Select the Equalizer curveTurn the [AUD] knob and push the center whenthe desired item is displayed.You can select from 22 Equalizer curve types foriPod when “iPod” is selected.Select the iPod Equalizer curve1. Enter iPod Equalizer modePress the [AUD] knob. |
