Kenwood KDV-415U Instruction Manual

Also see for KDV-415U: Brochure & specs Service manual

English | 7For first useLanguage SetupSet a language used for screen display, DVD subtitles,etc.• “Language” item of the Setup menu (page 13)DSP SetupTo get clear sound, set the sound environmentaccording to the location and size of physicallyinstalled speakers with reference to the followings:• “MENU” > “SWPRE” of (page 11)• Cabin selection (page 28)• Speaker Setting (page 28)• DTA (Digital Time Alignment) setting (page 29)• X’Over setting (page 29)⁄• Setting “DSP SET” to “BYPASS” disables the settings relatedto the DSP function. Refer to “DSP” > “DSP SET” of Control> (page 12).Before using this unit for the firsttimeDemonstration mode settingThis unit is initially set on the Demonstration mode.When using this unit for the first time, cancel theDemonstration mode setting.Display Setting“DEMO ON” The Demonstration mode function is ON.“DEMO OFF” Cancel Demonstration mode (Normal mode).1 Select StandbyPress the [SRC] button.Select the “STANDBY” display.2 Enter Function Control modePress the [ ] button for at least 1 second.“FUNCTION” is displayed.3 Enter Menu modeTurn the [AUD] knob to select “MENU”.Press the [AUD] knob.4 Set the Demonstration modeTurn the [AUD] knob to select “DEMO”.Press the [AUD] knob for at least 2 seconds.Select the “DEMO OFF” display.5 Exit Function Control modePress the [ ] button for at least 1 second.⁄• These settings can be changed later.