| 
English | 27Preset position “PRESET”Adjustment Item DisplayNot compensating. “ALL”Front-Left seat “F-LEFT”Adjustment Item DisplayFront-Right seat “F-RIGHT”Front seat “F-ALL”Manual position “MANUAL”Adjustment Item DisplayFront Left speaker “F-LEFT”Front Right speaker “F-RIGHT”Rear Left speaker “R-LEFT”Rear Right speaker “R-RIGHT”Adjustment Item DisplaySubwoofer Left “SW-LEFT”Subwoofer Right “SW-RIGHT”Initialize the settingvalues.“INITIAL”1 Enter Preset position setting modePress [ ] 1 sec., and select “DSP” > “CONTROL” >“POSITION” > “PRESET”.Press the [AUD] knob.• For how to select Function Control items, refer to (page 10).2 Select the seat you want to compensateTurn the [AUD] knob and push the center whenthe desired item is displayed.3 Exit Preset position setting modePress the [ ] button.You can fine-adjust your listening position.1 Enter Manual position adjust modePress [ ] 1 sec., and select “DSP” > “CONTROL” >“POSITION” > “MANUAL”.Press the [AUD] knob.2 Select the speaker you want to setTurn the [AUD] knob and push the center.Selecting “INITIAL” initializes the Manual position✍adjustment.3 Set the valueTurn the [AUD] knob and push the center whenthe desired value is displayed.Adjust between 0 and 5.58 feet.4 Exit Manual position adjust modePress the [ ] button twice.⁄• About the position settingFirst, set the using environment with Alignment) Setting> (page 29).• When using the Subwoofer Left and Subwoofer Right asa single sub woofer, set the left side and right side to thesame value.Manual Equalizer ControlYou can adjust following Equalizer Control items;Adjustment Item RangeBand level “BAND#” > “GAIN” -9 – 0 – +9Bass Effect* “BAND1” > “EFFECT” “OFF”/ “ON”• *Can be only set for “BAND1”.1 Enter Manual Equalizer Control modePress [ ] 1 sec., and select “DSP” > “CONTROL” >“EQ” > “MANUAL”.Press the [AUD] knob.• For how to select Function Control items, refer to (page 10).2 Select the band you want to setTurn the [AUD] knob and push the center.“BAND1” – “BAND5”3 Select the item you want to setTurn the [AUD] knob and push the center.4 Set the valueTurn the [AUD] knob and push the center whenthe desired item is displayed.5 Exit Manual Equalizer Control modePress the [ ] button twice.⁄• When “iPod” is selected in the section select> (page 26), Manual Equalizer Control is disabled.• You can select for each source.2. Select the iPod Equalizer curveTurn the [AUD] knob and push the center whenthe desired item is displayed.3 Exit Preset Equalizer mode.Press the [ ] button.⁄• You can select for each source.Position ControlAccording to the listening position, select theposition from the following settings so that thenormal position of the sound environment canbe compensated in accordance with the selectedposition; |
