English | 37Connecting Wires to TerminalsP.CONTANT.CONTMUTER LPRK SWVIDEOOUTBatteryGround wire (Black) - (To car chassis)FM/AM antenna inputVisual output (Yellow)Fuse (10A)Wiring harness(Accessory1)Ignition wire (Red)Battery wire (Yellow)ACCCar fuse boxIf no connections are made, do not let the wire come out from the tab.To front left speakerTo front right speakerTo rear left speakerTo rear right speakerWhite/BlackWhiteGray/BlackGrayGreen/BlackGreenPurple/BlackPurpleIgnition key switchCar fuse box(Main fuse)To Kenwood disc changer/ External optional accessory⁄ To connect these leads, refer to the relevant instruction manuals.For the sake of safety, be sure toconnect the parking sensor.⁄ Connect to the vehicle’sparking brake detectionswitch harness.TEL mute wire (Brown) Connect to the terminal that is grounded when either the telephone ringsor during conversation.⁄ To connect the Kenwood navigation system, consult your navigationmanual.Power control/Motor antenna control wire(Blue/White) Connect either to the power control terminal when using the optionalpower amplifier, or to the antenna control terminal in the vehicle.AV inputUse of the optional cable CA-C3AVis recommended for connecting anexternal player.USB connectorFront outputRear output/ Sub Woofer output/AV output (audio)Do not connect.Parking sensor wire (Light Green)Front sideMotor antenna control wire (Blue) Depending on what antenna you are using, connect either to the controlterminal of the motor antenna, or to the power terminal for the boosteramplifier of the film or short pole-type antenna.Parking sensor wireJunction cable(Light Green)(Accessory3)