Kenwood KMM-BT505DAB Instruction Manual

Also see for KMM-BT505DAB: Quick start guide

4 ENGLISHGETTING STARTEDDefault: [XX][AUDIO CONTROL][SWITCH PREOUT] (Applicable only if [X’OVER] is set to [2WAY].) (Page 5)[REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer areconnected to the line out terminals on the rear (through an externalamplifier). (Page 34)[DISPLAY][EASY MENU] When entering [FUNCTION]...[ON]: [ZONE 1] illumination changes to white color. ;[OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color.(Page 26)• [ZONE 2] illumination changes to light blue color when you enter[FUNCTION], irregardless of the [EASY MENU] setting.• Refer to the illustration on page 25 for zone identification.[TUNER SETTING][DAB ANT POWER] [ON]: Supplies power to the DAB antenna. ; [OFF]: Does not supply power.Selects when using passive antenna without booster. (Page 34)[PRESET TYPE] [NORMAL]: Memorizes one station for each preset button in each band(FM1/FM2/FM3/MW/LW/DB1/DB2/DB3). ; [MIX]: Memorizes one station(digital radio or analog radio) for each preset button, regardless of theselected band.[SYSTEM][KEY BEEP] (Applicable only if [X’OVER] is set to [2WAY].) (Page 5)[ON]: Activates the keypress tone. ; [OFF]: Deactivates.[SOURCE SELECT][SPOTIFY SRC] [ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables.(Page 13)[BUILT-IN AUX] [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 12)Set the clock and date1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [CLOCK], then press the knob.To adjust the clock3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.4 Turn the volume knob to make the settings, then press the knob.Hour Minute5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.6 Turn the volume knob to select [12H] or [24H], then press the knob.To set the date7 Turn the volume knob to select [DATE FORMAT], then press the knob.8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then pressthe knob.9 Turn the volume knob to select [DATE SET], then press the knob.10 Turn the volume knob to make the settings, then press the knob.Day Month Year or Month Day Year11 Press and hold to exit.To return to the previous setting item, press .Set the initial settings1 Press B SRC repeatedly to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select an item (see the following table), thenpress the knob.4 Repeat step 3 until the desired item is selected or activated.5 Press and hold to exit.To return to the previous setting item, press .32