Kenwood KMM-BT505DAB Instruction Manual

Also see for KMM-BT505DAB: Quick start guide

ENGLISH 37SPECIFICATIONSINSTALLATION/CONNECTION7 Remove the film covering the earth sheet and paste the earth sheet on the metal partof the vehicle.Provide sufficient leeway for the earth sheet so that it does not interfere with the interior parts(front pillar cover). Also take care that the interior parts do not interfere with the amplifier unit(G).(G)WindscreenEarth sheetFront pillar cover8 Wire the antenna cables.Use cable clamper (H) to secure the antenna to the pillar at several positions.9 Attach the front pillar cover back to its original position.Be sure not to damage the earth sheet and amplifier unit (G) when covering.10 Connect the amplifier unit (G) to the DAB antenna jack on the rear of the unit.11 Set [DAB ANT POWER] to [ON]. (Page 4)Digital radioDAB Frequency Range Band III 174.928 MHz — 239.200 MHzSensitivity –100 dBmSignal-to-Noise Ratio 90 dBAntenna Connector Type SMBAntenna Output Voltage 12 V DCAntenna Maximum Current < 100 mATunerFM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz step)Usable Sensitivity (S/N = 30 dB) 6.2 dBf (0.56 μV/75 Ω)Quieting Sensitivity (DIN S/N = 46 dB) 15.2 dBf (1.58 μV/75 Ω)Frequency Response (±3 dB) 30 Hz — 15 kHzSignal-to-Noise Ratio (MONO) 68 dBStereo Separation (1 kHz) 40 dBMW(AM)Frequency Range 531 kHz — 1 611 kHz (9 kHz step)Usable Sensitivity (S/N = 20 dB) 28.5 μVLW(AM)Frequency Range 153 kHz — 279 kHz (9 kHz step)Usable Sensitivity (S/N = 20 dB) 45 μVUSBUSB Standard USB 1.1, USB 2.0 (Full speed)File System FAT12/16/32Maximum Supply Current DC 5 V 1.5 AFrequency Response (±1 dB) 20 Hz — 20 kHzSignal-to-Noise Ratio 99 dB (1kHz)Dynamic Range 93 dBChannel Separation 89 dB