Kenwood KMM-BT505DAB Instruction Manual

Also see for KMM-BT505DAB: Quick start guide

26 ENGLISHDefault: [XX][DISPLAY][COLOR SELECT] Selects illumination colors for [ALL ZONE], [ZONE 1] and [ZONE 2]separately.1 Select a zone ([ZONE 1], [ZONE 2], [ALL ZONE]). (See the illustration onpage 25.)2 Select a color for the selected zone.[INITIAL COLOR]/[VARIABLE SCAN]/[CUSTOM R/G/B]/[RED1]/[RED2]/[RED3]/[PURPLE1]/[PURPLE2]/[PURPLE3]/[PURPLE4]/[BLUE1]/[BLUE2]/[BLUE3]/[SKYBLUE1]/[SKYBLUE2]/[LIGHTBLUE]/[AQUA1]/[AQUA2]/[GREEN1]/[GREEN2]/[GREEN3]/[YELLOWGREEN1]/[YELLOWGREEN2]/[YELLOW]/[ORANGE1]/[ORANGE2]/[ORANGERED]Default:: [VARIABLE SCAN]KMR-M505DAB : [INITIAL COLOR]To make your own color, select [CUSTOM R/G/B]. The color you have madewill be stored in [CUSTOM R/G/B].1 Press the volume knob to enter the detailed color adjustment.2 Press S/T to select the color ([R]/[G]/[B]) to adjust.3 Turn the volume knob to adjust the level ([0] to [9]), then press the knob.[DIMMER] Dims the illumination.[ON]: Dimmer is turned on.[OFF]: Dimmer is turned off.[DIMMER TIME]: Set the dimmer on and off time.1 Turn the volume knob to adjust the [ON] time, then press the knob.2 Turn the volume knob to adjust the [OFF] time, then press the knob.Default: [ON]: [18:00] ; [OFF]: [6:00][BRIGHTNESS] 1 Select a zone. (See the illustration on page 25.)2 [LVL 00] to [LVL 31]: Set the brightness level for the selected zone.[TEXT SCROLL] [ONCE]: Scrolls the display information once. ; [AUTO]: Repeats scrolling at5-second intervals. ; [OFF]: Cancels.• Not applicable to Dynamic Label display information (page 28) while inDIGITAL AUDIO source[LEVEL METER] [ON]: Shows the level meter on the display window (as shown below). ;[OFF]: Cancels.Level meterDISPLAY SETTINGS