8 | KMR-700U*Factory setting** Refer to Displayed item is depending on currently selectedsource or mode. The mark in Condition columnshows the condition to which the item is displayed.: Can be set during USB source.: Can be set only during playback of the iPod source.: Can be set during Tuner source.: Can be set during FM reception.: Can be set while accessing AUX source.: Can be set during Satellite radio source.— : Can be set during all sources.⁄• Refer to the respective page for information on how toset the items with reference page number.• Only the items available to the current source aredisplayed.• Strong electrical fields (such as from power lines) maycause unstable sound quality when CRSC is turned ON.In such a situation, turn it OFF.Menu SystemSet up the following functions.1 Enter menu modePress the [ ] button for at least 1 second.“MENU” is displayed.2 Select the menu itemTune the [VOL] knob.3 Set the menu itemPress the [ ] or [ ] button.Usually, menu items are set by pressing the [ ]or [ ] button. Some items, however, requires thatthe [ENTER] button being pressed for at least 1 or2 seconds, before the settings can be made. 1 sec.or 2 sec. icon is displayed in the “Entry” column forsuch an item.4 Exit menu modePress the [ ] button.Item Setting Entry Setting overview Condition Page“Skip Search” “0.5%”*/ “1%”/“5%”/ “10%”Sets the ratio of skip performed with . 12“Beep” “OFF”/ “ON”* Setting the operation check sound (beep sound) ON/OFF. — —“Clock Adjust” — 1 sec. Sets the clock. — 5“Date Adjust” — 1 sec. Sets the date. — 5“Date Mode” — 1 sec. Sets the date display format. — 5“ILM Dimmer” “Auto”*/ “Manual”/“OFF”Sets whether the key illumination is dimmed in conjunction withthe light switch of the vessel or it is dimmed constantly.— **“ILM Effect” “OFF”/ “ON”* Sets whether the key illumination brightness is changed inconjunction with the key operation.— —“DISP Dimmer” “Auto”*/ “Manual”/“OFF”Sets whether the display illumination is dimmed in conjunctionwith the light switch of the vessel or it is dimmed constantly.— **“Contrrast” “1”– “10” Adjusting the display contrast. — —“DISP N/P” “POSI 1”/ “2”/ “NEGA 1”/ “2”Switches the panel display between positive or negative. — **“AMP” “OFF”/ “ON”* Turns on/off the built-in amplifier. — **“Supreme” “OFF”/ “ON”* Turns ON/OFF the Supreme function. **“Seek Mode” “Auto1”*/ “Auto2”/“Manual”Selects the tuning mode of the radio. **“Seek Mode” “Channel”*/ “Preset” Sets the seek mode of satellite radio. 19“Auto Memory” — 2 sec. Memorizes six stations with good reception automatically. 11“CRSC” “OFF”/ “ON”* Switches to Monaural to decrease noise when reception is poor. —“ESN=” — Displays the Electronic Serial Number of satellite radio. —“Name Set” — 1 sec. Sets the display when switched to AUX source. 10“Scroll” “Auto”*/ “Manual” Specifies whether the text is scrolled automatically. — —“Favorite Delete” — 1 sec. Deletes Favorite Preset Memory. — 17“Built in AUX” “OFF”/ “ON”* Sets whether to display AUX during source selection. — —“Audio Preset” — 1 sec. Registering the value setup by Audio Control. — 15“Backup MEM DEL” — 1 sec. Initializes the settings of “MENU”, etc. — 16“SYS F/W VER” — Display the firmware version and update the firmware. — —