30 ENGLISHDefault: [XX][DISPLAY][COLOR SELECT] Selects illumination colors for [ALL ZONE], [ZONE 1] and [ZONE 2]separately.1 Select a zone. (See the illustration on page 29.)2 Select a preset color for the selected zone.Default:: [VARIABLE SCAN]: [INITIAL COLOR]To make your own color, select [CUSTOM R/G/B]. The color you have madewill be stored in [CUSTOM R/G/B].1 Press the volume knob to enter the detailed color adjustment.2 Press S/T to select the color ([R]/[G]/[B]) to adjust.3 Turn the volume knob to adjust the level ([0] to [9]), then press the knob.[DIMMER] Dims the illumination.[ON]: Dimmer is turned on.[OFF]: Dimmer is turned off.[DIMMER TIME]: Set the time to turn on dimmer and to turn off dimmer.1 Turn the volume knob to adjust the [ON] time, then press the knob.2 Turn the volume knob to adjust the [OFF] time, then press the knob.Default: [ON]: [18:00] ; [OFF]: [6:00][BRIGHTNESS] Sets the brightness for day and night separately.1 [DAY]/[NIGHT]: Select day or night.2 Select a zone. (See the illustration on page 29.)3 [LVL00] to [LVL31]: Set the brightness level.[TEXT SCROLL] [ONCE]: Scrolls the display information once. ; [AUTO]: Repeats scrolling at5-second intervals. ; [OFF]: Cancels.• Not applicable to Dynamic Label display information (page 38) while inDIGITAL AUDIO source.Display Settings[LEVEL METER] [ON]: Shows the level meter on the display window (as shown below). ;[OFF]: Cancels.Level meter[CLOCK][CLOCK DISPLAY] (For only)[ON]: The clock time is shown on the display even when the unit is turnedoff. ; [OFF]: Cancels.[DEMO MODE] (For only)[ON]: Activates the display demonstration automatically if no operation isdone for about 15 seconds. ; [OFF]: Deactivates.Preset color:[INITIAL COLOR]/[VARIABLE SCAN]/[CUSTOM R/G/B]/[RED1]/[RED2]/[RED3]/[PURPLE1]/[PURPLE2]/[PURPLE3]/[PURPLE4]/[BLUE1]/[BLUE2]/[BLUE3]/[SKYBLUE1]/[SKYBLUE2]/[LIGHTBLUE]/[AQUA1]/[AQUA2]/[GREEN1]/[GREEN2]/[GREEN3]/[YELLOWGREEN1]/[YELLOWGREEN2]/[YELLOW]/[ORANGE1]/[ORANGE2]/[ORANGERED]