Kenwood KMR-M506DAB Instruction Manual

Also see for KMM-BT506DAB: Quick start guide Instruction manual Instruction manual Quick start guide

ENGLISH 41TroubleshootingSymptom RemedyBluetooth®“NO ENTRY”/“NO PAIR” There is no registered device connected/found viaBluetooth.“ERROR” Try the operation again. If “ERROR” appears again, checkif the device supports the function you have tried.“NO INFO”/“NO DATA” Bluetooth device cannot get the contact information.“HF ERROR XX”/“BT ERROR”Reset the unit and try the operation again. If this does notsolve the problem, consult your nearest service center.“SWITCHING NG” The connected phones might not support phoneswitching feature.The Bluetooth connectionbetween the Bluetoothdevice and the unit isunstable.Delete the unused registered Bluetooth device from theunit. (Page 21)AMAZON ALEXANo response from Alexa afterthe voice input.Amazon cloud was unable to analyze the voice input.Wrong response from Alexa. Alexa misunderstood what was said or did not catchthe entire request or sentence spoken. Please try again.(Page 24)“DISCONNECTED” Be sure to connect your smartphone to the unit viaBluetooth. (Page 18)Not able to connect orreconnect to Alexa mobileapplication.• Be sure the audio device is connected via Bluetooth.Select the audio device from [AUDIO SELECT] in [BTMODE]. (Page 21)• Perform the one-time setup process again. See “Setup forthe first time” on page 23.• Turn off, then turn on the unit and try to connect again.• For iOS device, make sure ALEXA source or iPod BT sourceis selected.SpecificationsDigital radioDAB Frequency Range Band III:174.928 MHz — 239.200 MHzSensitivity –100 dBmSignal-to-Noise Ratio 90 dBAntenna Connector Type SMBAntenna Output Voltage 12 V DCAntenna Maximum Current < 100 mAAnalog radioFM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz step)Usable Sensitivity (S/N = 30 dB) 6.2 dBf (0.56 μV/75 Ω)Quieting Sensitivity(DIN S/N = 46 dB)15.2 dBf (1.58 μV/75 Ω)Frequency Response (±3 dB) 30 Hz — 15 kHzSignal-to-Noise Ratio (MONO) 68 dBStereo Separation (1 kHz) 40 dBMW(AM)Frequency Range 531 kHz — 1 611 kHz (9 kHz step)Usable Sensitivity (S/N = 20 dB) 28.5 μVLW(AM)Frequency Range 153 kHz — 279 kHz (9 kHz step)Usable Sensitivity (S/N = 20 dB) 45 μV