Kenwood KMR-M506DAB Instruction Manual

Also see for KMM-BT506DAB: Quick start guide Instruction manual Instruction manual Quick start guide

ENGLISH 37Installation/Connection7 Remove the film covering the earth sheet and paste the earth sheet on the metal partof the vehicle.Provide sufficient leeway for the earth sheet so that it does not interfere with the interior parts(front pillar cover). Also take care that the interior parts do not interfere with the amplifier unit(G).(G)WindscreenEarth sheetFront pillar cover8 Wire the antenna cables.Use cable clamper (H) to secure the antenna to the pillar at several positions.9 Attach the front pillar cover back to its original position.Be sure not to damage the earth sheet and amplifier unit (G) when covering.10 Connect the amplifier unit (G) to the DAB antenna jack on the rear of the unit.Note:Make sure [DAB ANT POWER] is set to [ON] on the [FUNCTION] menu in standbymode. (Page 6)[ON] is selected initially.ReferencesMaintenanceCleaning the unitWipe off dirt on the faceplate with a dry silicone or soft cloth.Cleaning the connectorDetach the faceplate and clean the connector gentlywith a cotton swab. Be careful not to damage theconnector.More informationFor: – Latest firmware updates and latest compatible item list– KENWOOD original application– Any other latest informationVisit .Playable files• Playable audio file for USB mass storage class device:MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac)• Playable USB device file system: FAT12, FAT16, FAT32Even when audio files comply with the standards listed above, playback may be impossibledepending on the types or conditions of media or devices.• For detailed information and notes about the playable audio files, visit.Connector (on the reverseside of the faceplate)