Preparations1 2KR-V9090/8090 (En/T)Operations Other−+R LSURROUNDSPEAKERSBR LFRONT SPEAKERSª· ª·AR LFRONT SPEAKERS−+CCENTER SPEAKERª· ·ªª·SURROUND CENTERSUBWOOFERPRE OUT• Never short circuit the + and – speaker cords.• If the left and right speakers are connected inversely or thespeaker cords are connected with reversed polarity, thesound will be unnatural with ambiguous acoustic imaging.Be sure to connect the speakers correctly.• To emphasize deep bass sounds, connect a subwoofer asdesired.1 Strip coating. 2 Loosen. 3 Insert. 4 Secure.Connecting the speakersSetting up the systemRightFront Speakers ALeftRightUse the FRONTSPEAKERS B ter-minals if you wantto connect a sec-ond front speakersystem.LeftCenter SpeakerCenter speaker impedance:KR-V9090: (4–16 Ω)KR-V8090: (4–16 Ω)SurroundSpeakersSurround speakerimpedance:KR-V9090: (4–16 Ω)KR-V8090: (8–16 Ω)(Be sure to connect both surround speakers)PoweredsubwooferSpeaker impedanceWhen only one pair of speakers is connected tothe A or B speaker terminals, use speakers havingan impedance of 4 to 16 Ω, when two pairs ofspeakers are connected to both A and B terminalssimultaneously, use speakers having an imped-ance of 8 to 16 Ω. In this case, connecting aspeaker having an impedance of less than 8 Ω maycause malfunction of the receiver.Front speaker impedance:KR-V9090: (A OR B: 4–16 Ω, A AND B: 8–16 Ω)KR-V8090: (A OR B: 4–16 Ω, A AND B: 8–16 Ω)