Kenwood KR-V8090 Instruction Manual

Also see for KR-V8090: Service manual Service manual Service manual

Contents

Preparations1 6KR-V9090/8090 (En/T)Operations OtherPreparing for surround soundDSP mode setup1 Select a DSP mode.• The following adjustments (effect level, wall type, and room size) arecommon for all DSP modes. If necessary these modes can be adjustedagain according to your preference after listening to the surrroundeffect they produce.• The subwoofer, center mode and test tone adjustments made in thePRO LOGIC mode are automatically applied to the DSP modes.$2 Adjust the EFFECT level.1 Press to select EFFECT.2 Use the TUNING/SKIP +/– keys on theremote to select the level you desire.• The EFFECT level is adjustable in 5 steps, 1 Ô 5 (larger numberrepresent a stronger effect).TUNING/SKIPSETUPNAERA DSPWhen the "ARENA" DSP mode is selectedECFFE T 3 DSPDisplay when the EFFECT level setting is selectedDSPLights3 Adjust the WALL type.1 Press to select WALL.2 Use the TUNING/SKIP +/– keys on theremote to select the type you desire.SETUPTUNING/SKIP • The WALL type is adjustable in 3 steps, "HARD" (hard), "MED"(medium) and "SOFT" (soft).Display when the WALL type setting is selectedLLAW HA RD DSP