5 7KR-V9090/8090 (En/T)PreparationsOperationsOtherSpecifications Caution : Read this page carefully to ensure safe operation.AUDIO sectionRated power output during STEREO operation(KR-V9090)(DIN) 1 kHz, 0.7% at 4 Ω ............................. 120 W + 120 W(IEC) 63 Hz ~ 12.5 kHz, 0.7% at 4 Ω ......... 120 W + 120 W(KR-V8090)(DIN) 1 kHz, 0.7% at 4 Ω ............................. 110 W + 110 W(IEC) 63 Hz ~ 12.5 kHz, 0.7% at 4 Ω ......... 110 W + 110 WRated power output during SURROUND operation(KR-V9090)FRONT(1kHz, 0.7% T.H.D. at 4 Ω) ........... 120 W + 120 WCENTER (1kHz, 0.7% T.H.D. at 4 Ω) ....................... 120 WSURROUND(1kHz, 0.7% T.H.D. at 4 Ω) ...... 60 W + 60 W(KR-V8090)FRONT(1kHz, 0.7% T.H.D. at 4 Ω) ........... 110 W + 110 WCENTER (1kHz, 0.7% T.H.D. at 4 Ω) ....................... 110 WSURROUND(1kHz, 0.7% T.H.D. at 4 Ω) ................. 110 WTotal harmonic distortion(KR-V9090) .............................. 0.015 % (1kHz, 60 W, 4 Ω)(KR-V8090) .............................. 0.015 % (1kHz, 55 W, 4 Ω)Frequency responseCD ...................................... 5 Hz ~ 85 kHz, +0.5 dB, –3 dBSignal to noise ratio (DIN)PHONO (MM) ............................................................ 62 dBCD .............................................................................. 60 dBInput sensitivity / impedancePHONO (MM) ............................................ 2.5 mV / 47 kΩCD ............................................................. 200 mV / 47 kΩADAPTOR IN ............................................ 400 mV / 10 kΩOutput level / impedanceTAPE REC ................................................... 200 mV / 1 kΩADAPTOR OUT .......................................... 200 mV / 1 kΩPRE OUT (CENTER, SURROUND) ................ 1 V / 600 ΩPRE OUT (SUBWOOFER) ................................ 1 V / 1 kΩTone controlBASS .................................................... ± 8 dB (at 100 Hz)TREBLE ................................................. ± 8 dB (at 10 kHz)LOUDNESS controlVOLUME at -40dB level ... +7 dB(100 Hz), +3 dB(10 kHz)VIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................. 1 Vp-p / 75 ΩFM tuner sectionTuning frequency range ....................... 87.5 MHz ~ 108 MHzUsable sensitivity (DIN, 75 Ω)MONO ......... 1.2μV / 13.2 dBf (40 kHz DEV., S/N 26 dB)STEREO ........ 35μV / 42.1 dBf (46 kHz DEV., S/N 46 dB)Total harmonic distortion (DIN, 1 kHz)MONO ............................................ 0.2 % (65.2 dBf input)STEREO .......................................... 0.5 % (65.2 dBf input)Signal to noise ratio (DIN weighted, 1 kHz)MONO .................... 65 dB (40 kHz DEV., 65.2 dBf input)STEREO .................. 60 dB (46 kHz DEV., 65.2 dBf input)Stereo separation (DIN, 1 kHz) ..................................... 40 dBSelectivity (DIN, ±300 kHz) ............................................ 64 dBFrequency response (30 Hz ~ 15kHz) ........ +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range ........................ 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod., S/N 20 dB)........................................................... 16 μV / (600 μV/m)Signal to noise ratio (30 % mod., 1 mV input) ............ 48 dBGENERALPower consumption(KR-V9090) .............................................................. 330 W(KR-V8090) .............................................................. 280 WAC outletSWITCHED ....................................... 2 (total 100 W max.)Dimensions ........................................................... W : 440 mm......................................................................... H : 147 mm......................................................................... D : 392 mmWeight (Net)(KR-V9090) ............................................................... 11 kg(KR-V8090) ............................................................... 10 kgKENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.NoteNote