— 13 —Press the ¢ button repeatedly until the Region restrict func-tion appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "REG ON" or "REG OFF" inthe display, indicating that the function is on or off, respective-ly.Switching settingsPress either the AM button or FM button.The display and setting will change.Press the MENU button to end the menu mode.Sometimes stations in the same network broadcast different pro-grammes or use different programme service names.NOTE432Traffic Information FunctionYou can listen to traffic information. If you are listening totapes or discs, they will continue playing until a traffic bulletinis broadcast.Turning TI function On/Off:Press the TI button to turn the function on and off.When the function is on, the TI indicator is turned on.When a traffic information station is being received, the TPindicator will turn on. When none is being received, the indica-tor will blink on and off.When a traffic bulletin begins to be broadcast, the TA indicatorwill turn on, and reception will begin at the preset volume.If you are listening to a tape or disc when a traffic bulletinbegins, they will automatically be turned off. When the bul-letin ends or poor reception is experienced, the tape or discwill begin playing again.Pressing the TI button whilst in the MW/LW band automaticallyswitches reception to the FM band. However, the MW/LW bandis not returned to when the TI button is pressed again.Switching to a Different Traffic Information Station:Use the 4 / ¢ buttons to make an auto seek of the TI sta-tions in a certain band.NOTEAuto TP Seek FunctionWhen the TI function is on and poor reception conditions areexperienced when listening to a traffic information station,another traffic information station with better reception willbe searched for automatically. This function is on, when unitis first powered on.Turning Auto TP Seek Function On/Off:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Auto TP Seek func-tion appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "ATPS ON" or "ATPS OFF"in the display, indicating that the function is on or off, respec-tively.Switching settingsPress either the AM button or FM button.The display and setting will change.If the traffic information station you are tuned to experiencespoor reception, this function automatically seeks another TPstation after about 30 seconds.Press the MENU button to end the menu mode.4321• When you are listening to a tape or disc, you cannot change toanother TI station.• When the auto TP seek function is turned on and receptionstarts to weaken, the tuner automatically seeks stations withbetter reception.• If you are tuned to a station that is not a traffic information sta-tion itself but which provides EON services, you can still havetraffic information received. The EON indicator lights up whenEON signals are being received.NOTE