Kenwood KRC-259R Instruction Manual

Also see for KRC-11RA: Instruction manual

— 9 —• Make sure to end the menu mode when finished. If you fail toend the menu mode, several functions may not operate proper-ly, including the Traffic Information function, the News Bulletinfunction with PTY news timeout setting, and the Alarm func-tion.• Some tuner functions will not be displayed unless you are cur-rently listening to the tuner.• Functions marked with an asterisk (*) cannot be used duringAM reception.• The News function turns on when the setting is made for thenews interruption interval. The "00M" display indicates the set-ting selected for the news interruption timeout interval.NOTE↓(KRC-259R/21R/159RA,RG)DSI ON ↔ DSI OFF↑↓(KRC-259R/21R)COL GRN ↔ COL AMB↑↓NEWS 00M ↔ NEWS OFF↑↓LO.S ON ↔ LO.S OFF↑↓AUTO ↔ MANUAL↑↓A-MEMORY (start)↑↓AF ON ↔ AF OFF↑↓REG ON ↔ REG OFF↑↓ATPS ON ↔ ATPS OFF↑↓MONO ON ↔ MONO OFF↑↓PTY (PTY mode entered)↑Menu SystemTo accommodate a greater number of functions, a menu sys-tem has been employed for making settings. Press the MENUbutton to enter the menu mode and then display the functionto make the setting. Details on each setting are explainedseparately in the corresponding function page.Hold down the MENU button for one second or more."MENU" is displayed when the menu mode is entered.The function that you can adjust is indicated with the currentsettings displayed.Selecting function to setPress the ¢ button to search through the functions until yousee the one you want to adjust in the display.Press the 4 button to search through the functions back-ward.Example: If you want to switch the tuning mode from manualto automatic, first search through the functions untilyou see "MANUAL" in the display.Changing setting for currently displayed functionPress either the AM or FM button.The setting will change for each function.Example: The tuning mode will switch from manual to auto-matic, and "AUTO" is displayed.With the programme type function and the auto memory func-tion, the function will start to activate.To use the auto memory function, hold down either the AM orFM button for two seconds or more.Ending the menu modePress the MENU button.4NOTE321Function Varieties of settings foreach function (display)Disabled System IndicatorSelectable IlluminationNews Bulletin FunctionLocal seekSelecting Tuning ModeAuto Memory Entry*AF Function*Region Restrict Function*Auto TP Seek*Monaural Reception*Programme Type