Kenwood KRC-259R Instruction Manual

Also see for KRC-11RA: Instruction manual

Disc changer control features (See page 7)Function of the KRC-259R,21REnglish— 20 —Presetting Disc NamesStore the names of discs to be displayed when played.Play the disc whose name you want to preset.• This function is not available for disc changers that do not featurethe Disc Name Preset function.• This procedure is not to be used to store the disc and tracktitles for MDs that you record.Hold down the NAME SET button for two seconds or more."NAME SET" is displayed and the disc name preset mode isentered.The cursor blinks in the position where character input can bemade.Press either the 4 or ¢ button to move the cursor to thedesired position.The 4 button moves the cursor to the left, and the ¢ but-ton to the right.Press the DISC + or DISC – button to display the desired char-acter.Besides the alphabet (capital letters only) and numerals, youcan choose the following characters: [, ], /, + , – , *, =, <, and>.Continue steps 3 and 4 until all the characters are chosen forthe name.You can enter up to 8 characters for each name.Press the NAME SET buttonThe disc name is stored and the disc name preset mode is can-celled.If you make no entry in a 10-second period, the name will bestored with the characters entered so far.• The number of discs whose names can be stored will differdepending on the disc changer that is connected. Please seeyour disc changer manual for details.NOTE6NOTE5432NOTE1• Discs are identified by their total length and number of tracks. Ifyou play another CD that happens to have exactly the samespecifications as another CD whose name is stored, the wrongname will be displayed for it.• If you want to change the name of a disc, repeat steps 1 and 2to display the name, and then repeat steps 3 and 4 to enter thechanges.• Pressing the reset button does not erase the disc names storedin a disc changer.