Kenwood KRC-708 Instruction Manual

Also see for KRC-708: Service manual Service manual

General features— 8 —EnglishFunction of the KRC-X858"LPF NF" : Adjust the frequency of the Low-pass filter for Non-Fading output.Setting values: 50 Hz / 80 Hz / 120 Hz / Through• This mode is available only when the non-fading output functionis set to on.( page10).• Not available during the Dual zone system is on.NOTEFunction of the KRC-X858"HPF R" : Adjust the frequency of the High-pass filter for rearoutput.Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /150Hz / 180Hz / 220HzYou can separately set the high-pass filter for front and rearoutput,including preouts. The high-pass filter works except duringnon-fading preout when switching to non-fading. The factorydefault settings for front output and rear output are "Through" .NOTEFunction of the KRC-X858"HPF F" : Adjust the frequency of the High-pass filter for frontoutput.Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /150Hz / 180Hz / 220HzYou can separately set the high-pass filter for front and rearoutput,including preouts.The high-pass filter works except duringnon-fading preout when switching to non-fading.The factorydefault settings for front output and rear output are "Through" .NOTEFunction of the KRC-X858"NF Level" : Adjust the Non-fading output level.Setting values: - 15 – + 15• This mode is available only when the non-fading output functionis set to on.( page10).• Not available during the Dual zone system is on.NOTE"Fader" : Adjust the fader level.Setting values: Front 15 – Rear 15"Balance" : Adjust the balance level.Setting values: Left 15 – Right 15"Treble" : Adjust the treble level.Setting values: - 8 – + 8Function of the KRC-X858"Tre F" : Adjust the center frequency of the treble.Setting values: 10.0 / 12.5 / 15.0 / 17.5 kHzThis mode is available only when the Sound coordinate system ison. ( page36).NOTE