Putting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Put the frequency in the memoryPress the [#1] — [#6] button for at least 2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in the memory on each [#1]— [#6] button.Station Preset MemoryPress the [FM] or [AM] button.2 Enter Direct Access Tuning modePress the [DIRECT] button on the remote.The "– – – –" display.3 Enter the frequencyPress the number buttons on the remote.Example:Desired frequency Press button92.1 MHz (FM) [#0], [#9], [#2], [#1]810 kHz (AM) [#0], [#8], [#1], [#0]Canceling Direct Access TuningPress the [DIRECT] button on the remote.Entering the frequency and tuning.1 Select the bandDirect Access Tuning (Function of remote)Selecting the station.1 Select tuner sourcePress the [SRC] button.Select the "TUNER" display.2 Select the bandPress the [FM] or [AM] button.Each time the [FM] button is pressed it switches between theFM1, FM2, and FM3 bands.3 Tune up or down bandPress the [4] or [¢] button.During reception of stereo stations the "ST" indicator is ON.TuningChoose the tuning mode.Press the [AUTO] button.Each time the button is pressed the Tuning mode switches asshown below.Tuning mode Display OperationAuto seek "Auto1" Automatic search for a station.Preset station "Auto2" Search in order of the stationsseek in the Preset memory.Manual "Manual" Normal manual tuning control.Tuning Mode— 11 —