Kenwood KRC-865 Instruction Manual

Also see for KRC-865: Service manual

Selecting the display when this device is switched to Auxiliaryinput source.1 Select Auxiliary input sourcePress the [SRC] button.Select the "AUX" display.2 Enter Auxiliary input display setting modePress the [NAME.S] button for at least 2 seconds.The presently selected AUX Name is displayed.Auxiliary Input Display SettingExample: If "DANCE" is entered.Character Button #Times pressed"D" [#3] 1"A" [#2] 1"N" [#6] 2"C" [#2] 3"E" [#3] 26 Repeat steps 3 through 5 and enter the name.7 Exit name set modePress the [NAME.S] button.• When operation stops for 10 seconds the name at that time isregistered, and Name Set mode closes.• Memory numbers- FM: 32 stations- AM: 16 stations- External CD changer/ player: Varies according to the CD changer/player. Refer to the CD changer/ player manual.• The title of station/CD can be changed by the same operationused to name it.Attaching a title to a Station or CD.1 Receive/play the station/disc you want to attach a title to• A title can't be attached to a MD.• Disc Naming can't be done during CD text display.2 Enter name set modePress the [NAME.S] button for at least 2 seconds."NAME SET" is displayed.3 Move the cursor to the enter character positionPress the [4] or [¢] button.4 Select the character typePress the [38] button.Each time the button is pressed the character type switches asshown below.Character typeAlphabet upper caseAlphabet lower caseNumbers and symbolsSpecial characters (Accent characters)5 Select the charactersPress the [FM] or [AM] button.Characters can be entered by using a remote with a numberbuttons.Station/Disc Naming (SNPS/DNPS)Switching the displayed information.Press the [CLK] button.Each time the button is pressed it switches between clockdisplay and current source.During clock display the clock indicator is ON.Switching Clock DisplayGeneral features— 8 —English