Kenwood KRC-865 Instruction Manual

Also see for KRC-865: Service manual

1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Control modePress the [AUD] button for at least 1 second.3 Select the Audio item for adjustmentPress the [FM] or [AM] button.Each time the button is pressed the items that can be adjustedswitch as shown below.4 Adjust the Audio itemPress the [4] or [¢] button.Adjustment Item Display RangeBass Center Frequency "Bass F" 60/70/80/100 or 150 HzBass level "Bass" –8 — +8Bass Q Factor "Bass Q" 1.00/1.25/1.50/2.00Bass Extend "Bass EXT" ON/OFFMiddle Center Frequency "MID F" 0.5/1.0/1.5/2.0 kHzMiddle level "Middle" –8 — +8Middle Q Factor "Middle Q" 1.0/2.0Treble Center Frequency "TRE F" 10.0/12.5/15.0/17.5 kHzTreble level "Treble" –8 — +8Balance "Balance" Left 15 — Right 15Fader "Fader" Rear 15 — Front 15Volume offset "V Offset" –8 — ±0Audio ControlUser memory "User"• User memory: The values set on the

• Each setting value is changed with the (page7).First, select the speaker type with the Speaker setting.You can recall the best sound setting preset for different types ofthe music.1 Select the source to setPress the [SRC] button.2 Select the Sound typePress the [Q] button.Each time the button is pressed the sound setting switches.Sound setting DisplayFlat "Flat"Rock "Rock"Top 40 "Top 40"Pops "Pops"Jazz "Jazz"Easy "Easy"Scan of Flat — Easy "Scan"System QCompensating for low and high tones during low volume.Press the [LOUD] button for at least 1 second.Each time the button is pressed for at least 1 second theLoudness turns ON or OFF.When it's ON, "LOUD ON" is displayed.LoudnessTurning the volume down quickly.Press the [ATT] button.Each time the button is pressed the Attenuator turns ON or OFF.When it’s ON, the "ATT" indicator blinks.AttenuatorGeneral features— 6 —English