Kenwood KRF-V4060D Instruction Manual

Also see for KRF-V4060D: Instruction manual Service manual

Kenwood KRF-V4060D Instruction Manual Manual pdf 14 page image

14 EN1 Strip coating. 2 Push the lever.3 Insert the cord. 4 Return the lever.VIDEO 2COAXIALDVDDIGITAL INCD / DVDOPTICALVOLTAGESELECTORAC110V-120V / 220V-240V~50 / 60HzSWITCHEDTOTAL 90W MAX.AC OUTLETSAC 220-240V~AC 110-120V~SPEAKERSSURROUNDSPEAKERS(8-16Ω)CENTERSPEAKER(8-16Ω)FRONTSPEAKERS(8-16Ω)GRAYWHITE GREEN BLUEREDL CR LRCENTERSUB WOOFERPRE OUTSUBWOOFERSURROUNDFRONTDVD / 6CH INPUTPLAY INVIDEO 2DVDAUDIOREC OUT PLAY INVIDEO1PHONO REC OUT PLAY INMD / TAPECD / DVDLRGNDVIDEO 1OUTVIDEO 1INVIDEOVIDEO 2INDVDINMONITOROUTANTENNAGNDAMFM75Ω 75μsAM 10kHzFM 100kHz50μsAM 9kHzFM 50kHzDE-EMPHASISCHANNELSPACESYSTEMCONTROL+-+-ANTENNAGNDAMFM75ΩSetting up the systemConnecting the terminalsSpeaker impedanceAfter confirming the speaker impedance indications printed on therear panel of the receiver, connect speakers with matching imped-ance ratings. Using speakers with a rated impedance other than thatindicated on the rear panel of the receiver could result in malfunctionsor damage to the speakers or receiver.• Never short circuit the + and – speaker cords.• If the left and right speakers are connected inversely or the speakercords are connected with reversed polarity, the sound will beunnatural with ambiguous acoustic imaging. Be sure to connect thespeakers correctly.Connecting the antennasAM loop antennaThe supplied loop antenna is for use indoors. Place it as far as possiblefrom the receiver, TV set, speaker cords and power cord, and adjustthe direction for best reception.FM indoor antennaThe supplied indoor antenna is for temporary use only. For stablesignal reception we recommend using an outdoor antenna. Discon-nect the indoor antenna when you connect one outdoors.FM outdoor antennaLead the 75Ω coaxial cable connected to the FM outdoor antenna intothe room and connect it to the FM 75Ω terminal.AM antenna terminal connections1 Push lever. 2 Insert cord. 3 Release lever.FM antenna terminal connectionsInsert cord.Use an antennaadaptor(Commerciallyavailable)Attach to the standAM loop antennaFM indoor antennaFM outdoor antenna