Kenwood KRF-V4060D Instruction Manual

Also see for KRF-V4060D: Instruction manual Service manual

Kenwood KRF-V4060D Instruction Manual Manual pdf 23 page image

23 ENPresetting radio stations manuallyThe RDS auto memory function assigns preset numbers to RDSstations starting from preset number “1”. Therefore, be sure toexecute the RDS auto memory function before using the followingoperaptions to manually store AM stations and other FM stations, andRDS stations.See “Presetting RDS stations (RDS AUTO MEMORY)”.(For the U.K.and Europe only) ¢MULTI CONTROLMEMORY1Tune to the station you want to store.2Press the MEMORY key while receiving the station.3Use the MULTI CONTROL knob to select one of the stationpresets (1 – 40).4Press the MEMORY key again to confirm the setting.• Repeat steps 1, 2, 3, and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the previous stationwill be replaced by the new one.Receiving preset stationsTUNERNumeric keys1Press the TUNER key to select tuner as the source.Listening to radio broadcasts2Enter the number of the preset station you want to receive(up to “40”).Press the numeric keys in the following order:For “15”, press ................................ 0,5For “20”, press ................................ 0,0,)• If you make a mistake entering a two digit number, press the +10key repeatedly to return to the original display and start again.Receiving preset stations in order (P.CALL)TUNERP.CALL4 / ¢1Press the TUNER key to select tuner as the source.2Use the P.CALL 4¥¢key to select the desired station.• Each time you press the key, another preset station is received inorder.Pressing the P.CALL ¢ does the following :Pressing the P.CALL 4 does the following :Holding down the ¢ or 4 key, lets you skip through thepresets, receiving each preset station at 0.5 second intervals.Proceed to step 3 within 5 seconds.(If more than 5 seconds elapse, press the MEMORY key again).Blinks for 5 seconds Lights for 5 seconds