Kenwood KRF-V4060D Instruction Manual

Also see for KRF-V4060D: Instruction manual Service manual

Kenwood KRF-V4060D Instruction Manual Manual pdf 20 page image

20 ENNormal playbackAdjusting the soundAdjusting the TONE (remote control only)You can adjust the sound quality when the receiver is in the PCM stereoand analog stereo mode.1 Press the TONE key to select the TONE mode.2 Use the MULTI CONTROL knob or keys to select TONE ON/OFF.3 Press the TONE key for the following displays.1 TONE : Tone setting mode is ON.2 BASS : Select this to adjust the low frequency range.3 TREB : Select this to adjust the high frequency range.4 Use the MULTI CONTROL knob or keys to adjust the soundquality.• The bass and treble levels are adjustable from -10 to +10 in 2 stepincrements.• The adjustment item is displayed for approximately 8 seconds.• If CINEMA EQ is turned ON, TONE function will not be available.Once-touch low frequency emphasis (BASS BOOST)(remote control only)You can adjust the sound quality when the receiver is in the PCM stereoand analog stereo modes.Press the BASS BOOST key.• Press the key once to select the maximum (+10) low frequencyemphasis setting.• TONE will automatically be turned ON.• This key does not function when the receiver is in the sound qualityor ambience effects adjustment mode.Switching back the previous settingPress the BASS BOOST key again.Adjusting the LOUDNESS mode (remote control only)You can adjust the Loudness function which controls the low volumesettings to maintain the music’s richness. The adjustment can be madewhen the receiver is in the PCM stereo and analog stereo mode.Press the LOUDNESS key to turn the LOUDNESS setting ON.To cancelPress the LOUDNESS key again so that the “LOUDNESS” indica-tor goes off.Muting the soundThe MUTE key lets you mute the sound of the speakers.Press the MUTE key.To cancelPress the MUTE key again so that the “MUTE” indicator goes off.• MUTE ON can also be deactivated by turning the volume controlknob.CINEMA EQ modeYou can enjoy a more impressive sound effect when you switchCINEMA EQ ON during Dolby Digital and DTS playback.Press the CINEMA EQ key.“CINEMA EQ” will scroll across the display.• When CINEMA EQ is turned ON, subwoofer remix’s function willalso be effective.• If REC MODE is ON or TREBLE’s level is -6 or below, CINEMA EQfunction will not be available.To cancelPress the CINEMA EQ key again so that the “CINEMA EQ”indicator goes off and displays “OFF”.• When CINEMA EQ is turned OFF, the setting will remain until thenext selection is made.Listening with headphones1 Press the SPEAKERS ON/OFF key so that the speaker indicatorgoes off.• If you turn off all of the speakers when in surround mode, thesurround mode will be canceled as well, resulting in stereo play-back.2 Connect headphones to the PHONES jack.PHONES3 Use the VOLUME CONTROL knob or VOLUME keys to adjust thevolume.Make sure the SP indicator is turned OFF.VOLUMEMUTEBASS BOOSTMULTICONTROLCINEMA EQVOLUME CONTROLPHONES MULTI CONTROLTONECINEMA EQLOUDNESSSPEAKERS ON/OFFMUTE