Kenwood KRF-V4070D Instruction Manual

Also see for KRF-V4070D: Instruction manual Service manual Instruction manual

Kenwood KRF-V4070D Instruction Manual Manual pdf 21 page image

21 ENPresetting radio stations manuallyMULTI CONTROLMEMORY1Tune to the station you want to store.2Press the MEMORY key while receiving the station.3Use the MULTI CONTROL knob to select one of the stationpresets (1 – 40).4Press the MEMORY key again to confirm the setting.• Repeat steps 1, 2, 3, and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the previous stationwill be replaced by the new one.Listening to radio broadcastsThe receiver can store up to 40 stations in the memory and recall themby one-touch operation.Tuning radio stations“AM” or “FM” indicatorappears in the display“AUTO” indicator lightsup in the display.1Use the INPUT SELECTOR knob or TUNER key to select thetuner.2Use the BAND key to select the desired broadcast band.Each press switches the bandas follows:1 FM2 AM3Use the AUTO key to select the desired tuning method.Each press switches the tuning method as follows:1 AUTO lit (auto tuning)2 AUTO not lit (manual tuning)• Normally, set to “AUTO” (auto tuning). If the radio waves are weakand there is a lot of interference, switch to manual tuning. (Withmanual tuning, stereo broadcasts will be received in monaural.)4Use the MULTI CONTROL knob or keys, or TUNING 1/¡keys to select the station.Auto tuning : The next station is tuned automatically.Manual tuning : Turn the knob (press the key) to select thedesired station.Frequencydisplay“TUNED” is displayedwhen a station is received.“ST.” lights whena broadcast is beingreceived in stereo.MULTI CONTROLINPUT SELECTORBAND AUTOMULTICONTROLTUNERAUTO BANDTUNING 1 / ¡Proceed to step 3 within 5 seconds.(If more than 5 seconds elapse, press the MEMORY key again).Blinks for 5 seconds Lights for 5 seconds