Kenwood KRF-V4070D Instruction Manual

Also see for KRF-V4070D: Instruction manual Service manual Instruction manual

Kenwood KRF-V4070D Instruction Manual Manual pdf 32 page image

32 ENSpecifications Caution : Read this page carefully to ensure safeoperation.For the U.S.A and CanadaAUDIO section (VR-705/715)Rated power output during STEREO operationEffective power output during SURROUND operationFRONT (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven)............................................................................... 100 W + 100 WCENTER (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven).............................................................................................. 100 WSURROUND (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channeldriven) ................................................................... 100 W + 100 WSUBWOOFER (80 Hz, 0.7% T.H.D. at 8Ω one channel driven)(VR-715) ................................................................................ 100 WTotal harmonic distortion ........................... 0.05% (1 kHz, 50 W, 8Ω)Frequency responseCD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dBSignal to noise ratio (IHF’66)CD/DVD, AUX, TAPE, VIDEO1, VIDEO2 ............................ 95 dBInput sensitivity / impedanceCD/DVD ................................................................ 550 mV / 47 kΩDVD/6CH INPUT (VR-715) .................................. 550 mV / 47 kΩOutput level / impedanceTAPE REC ............................................................... 550 mV / 1 kΩPRE OUT (SUBWOOFER) (VR-705) ...................... 1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at -30dB level ................................... +8 dB (at 100 Hz)For other countriesAUDIO section (KRF-V5070D/V5570D)Rated power output during STEREO operationEffective power output during SURROUND operationFRONT (1 kHz, 0.7% T.H.D. at 8Ω one channel driven)............................................................................... 100 W + 100 WCENTER (1 kHz, 0.7% T.H.D. at 8Ω one channel driven) .... 100 WSURROUND (1 kHz, 0.7% T.H.D. at 8Ω one channel driven)............................................................................... 100 W + 100 WSUBWOOFER (80 Hz, 0.7% T.H.D. at 8Ω one channel driven)(KRF-V5570D) ...................................................................... 100 WTotal harmonic distortion ........................... 0.05% (1 kHz, 50 W, 8Ω)Frequency responseCD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dBSignal to noise ratio (IHF’66)CD/DVD, AUX, TAPE, VIDEO1, VIDEO2 ............................ 95 dBInput sensitivity / impedanceCD/DVD ................................................................ 550 mV / 47 kΩDVD/6CH INPUT (KRF-V5070D) ........................ 550 mV / 10 kΩOutput level / impedanceTAPE REC ............................................................... 550 mV / 1 kΩPRE OUT (SUBWOOFER) (KRF-V5070D) ............. 1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at -30dB level ................................... +8 dB (at 100 Hz)AUDIO section (KRF-V4070D)Effective power output during STEREO operation1 kHz, 0.7% T.H.D.,at 8 Ω ............................................. 50 W + 50 WRated power output during STEREO operationEffective power output during SURROUND operationFRONT (1 kHz, 0.7% T.H.D. at 8Ω one channel driven)................................................................................... 50 W + 50 WCENTER (1 kHz, 0.7% T.H.D. at 8Ω one channel driven) .. 50 WSURROUND (1 kHz, 0.7% T.H.D. at 8Ω one channel driven)................................................................................... 50 W + 50 WTotal harmonic distortion ........................... 0.15% (1 kHz, 20 W, 8Ω)Frequency responseCD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dBSignal to noise ratio (IHF’66)CD/DVD, AUX, TAPE, VIDEO1, VIDEO2 ............................ 95 dBInput sensitivity / impedanceCD/DVD ................................................................ 400 mV / 47 kΩOutput level / impedanceTAPE REC ............................................................... 400 mV / 1 kΩPRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩTone controlBASS .................................................................. ±10 dB (at 70 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at -30dB level ................................... +8 dB (at 100 Hz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nmCoaxial ................................................................... 0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................................. 1 Vp-p / 75 ΩFM tuner sectionTuning frequency range ................................. 87.5 MHz ~ 108.0 MHzUsable sensitivity (MONO)VR-705/715................. 1.3 μV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)KRF-V5070D/V4070D/V5570D................... 1.6 μV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)50dB quieting sensitivitySTEREO ..................................................... 28 μV (75 Ω)/ 40.2 dBfTotal harmonic distortion (1 kHz)MONO .......................................................... 0.5% (71.2 dBf input)STEREO ....................................................... 0.7% (71.2 dBf input)Signal to noise ratio (1 kHz, 75 kHz DEV.)MONO ........................................................ 75 dB (71.2 dBf input)STEREO ..................................................... 68 dB (71.2 dBf input)Stereo separation (1 kHz) ........................................................... 40 dBSelectivity (±400 kHz) VR-705/715 ............................................ 70 dBKRF-V5070D/V4070D/V5570D ............. 50 dBFrequency response .................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range10 kHz step (VR-705/715) ........................... 530 kHz ~ 1,700 kHz10 kHz step (KRF-V5070D/V4070D/V5570D) . 530 kHz ~ 1,610 kHz9 kHz step (KRF-V5070D/V4070D/V5570D) ... 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod., S/N 20dB) (VR-705/715)........................................................................ 16 μV / (600 μV/m)Usable sensitivity (KRF-V5070D/V5570D/V4070D) . 16 μV / (600 μV/m)Signal to noise ratio (30% mod. 1 mV input) ........................... 50 dBGENERALPower consumption VR-705/715 ................................................ 2.2 AKRF-V5070D/V5570D .............................. 280WKRF-V4070D ............................................. 200WAC outletSWITCHEDVR-705/715 ........................................ (total 150 W, 1.25 A max.)KRF-V5070D/V4070D/V5570D ....................... (total 90 W max.)Dimensions .................................................... W : . 440 mm (17-5/16")H : 143 mm (5-5/8")D : 303 mm (11-15/16")Weight (Net)VR-705/715 ......................................................... 8.7 kg (19.18 lb)KRF-V5070D/V4070D/V5570D .......................... 9.3 kg (20.50 lb)Notes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).For your recordsRecord the serial number, found on the back of the unit, in the spacesdesignated on the warranty card, and in the space provided below. Referto the model and serial numbers whenever you call upon your dealer forinformation or service on this product.Model_____________________ Serial Number_____________________100 watts per channel minimum RMS, both channels driven, at 8Ω from40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)100 watts per channel minimum RMS, both channels driven, at 8Ω from40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)40 watts per channel minimum RMS, both channels driven, at 8Ω from40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)

/ 32

Related manuals for Kenwood KRF-V4070D