Kenwood KRF-V4070D Instruction Manual

Also see for KRF-V4070D: Instruction manual Service manual Instruction manual

Kenwood KRF-V4070D Instruction Manual Manual pdf 25 page image

25 ENSurround playThe DTS compatible models can reproduce a CD, DVD, or LD carrying theDTS mark.DOLBY DIGITAL can be used when playing DVD or LD software bearingthe mark and DOLBY DIGITAL format digital broadcasts (etc.).DOLBY PRO LOGIC can be used when playing video, DVD, or LDsoftware bearing the mark.INPUT SELECTORINPUT MODELISTEN MODEInputSelectorLISTEN MODEPreparations• Turn ON related components.• Complete “Preparing for surround sound” (speaker settings).^• Use the INPUT SELECTOR to select the component you wish toplay back with surround sound.• Use the INPUT MODE key to select the input mode (analog ordigital) for the source you wish to playback. 8• Noise will be produced when a DTS source is played by selecting theanalog input.1Start playing the video software.2Press the LISTEN MODE key to select the listening mode.The listening mode settings are stored separately for each input. If theinput mode is set to full auto (“AUTO DETECT” lights), the receiverselects the optimal listening mode automatically based on the type ofinput signal and the speaker settings.Each press of the LISTEN MODE key switches the setting aslisted.The listening mode settings are different depending on the typeof input signal.When the DOLBY DIGITAL signal is input:(The DOLBY DIGITAL, PRO LOGIC, or STEREO indicator lights up.)1 DOLBY DIGITAL : DOLBY DIGITAL surround.(The DOLBY DIGITAL LED indicator lightsup.)2 PL II MOVIE : PRO LOGIC II surround MOVIE mode.(The PRO LOGIC indicator lights up.)3 PL II MUSIC : PRO LOGIC II surround MUSIC mode.(The PRO LOGIC indicator lights up.)4 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode.(The PRO LOGIC indicator lights up.)5 STEREO : Normal stereo playback.(The STEREO indicator lights up.)When you select DOLBY DIGITAL“DOLBY DIGITAL” will scroll from right to left.When the DTS signal is input:(The DTS LED indicator lights up.)1 DTS : DTS surround2 STEREO : Normal stereo playbackWhen the analog signal or the digital signal (except forDOLBY DIGITAL or DTS signal) is input:1 PL II MOVIE : PRO LOGIC II surround MOVIE mode.(The PRO LOGIC indicator lights up.)2 PL II MUSIC : PRO LOGIC II surround MUSIC mode.(The PRO LOGIC indicator lights up.)3 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode.(The PRO LOGIC indicator lights up.)4 ARENA : DSP Surround ARENA mode.5 JAZZ CLUB : DSP Surround JAZZ CLUB mode.6 THEATER : DSP Surround THEATER mode.7 STADIUM : DSP Surround STADIUM mode.8 DISCO : DSP Surround DISCO mode.9 STEREO : Normal stereo playback.(The STEREO indicator lights up.)• Dolby Digital or DTS signal having more channels than the maximumnumber of playback channels available using the receiver’s currentsettings is input, downmixing is performed to match the number ofavailable channels.3Adjust the volume.Notes• Depending on the type of the signal or speaker setting, somelistening modes cannot be selected.• When playback is started, the sound may be cut or interruptedbefore the input source is confirmed as Dolby Digital.• To enjoy Dolby Digital surround (as well as all the other listeningmodes) from a single component, be sure to use a Dolby Digitalcompatible source component.Ambience effects