22 ENListening to radio broadcastsProceed to step 3 within 20 seconds.(If more than 20 seconds elapse, press the MEMORY key again).Blinks for 20 secondsPresetting radio stations manuallyThe RDS auto memory function assigns preset numbers to RDS stationsstarting from preset number “1”. Therefore, be sure to execute the RDSauto memory function before using the following operations to manuallystore AM stations and other FM stations, and RDS stations.See “Presetting RDS stations (RDS AUTO MEMORY)”. ¢MULTI CONTROLMEMORY1Tune to the station you want to store.2Press the MEMORY key while receiving the station.3Use the MULTI CONTROL knob or MULTI CONTROL %/ fikeysto select one of the station presets (1 – 40).4Press the MEMORY key again to confirm the setting.• Repeat steps 1, 2, 3, and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the previous stationwill be replaced by the new one.Receiving preset stationsTUNERNumeric keys1Press the TUNER key to select tuner as the source.2Enter the number of the preset station you want to receive (upto “40”).Press the Numeric keys in the following order:For “15”, press ................................ 0, 5For “20”, press ................................ 0, 0, )• If you make a mistake entering a two digit number, press the +10key repeatedly to return to the original display and start again.