Kenwood KRF-V5090D Instruction Manual

Also see for KRF-V5090D: Instruction manual Service manual

28 ENDVD 6-channel playbackUsing a DVD player or the like equipped with six (5.1) output channels andthis model, you can enjoy surround sound playback.Connecting a DVD player which can decode the surround signal itself isalso acceptable.DVD/6CHINPUT SELECTORINPUT MODEPreparations• Connect your DVD player to the DVD/6CH jacks of this model.• Turn on all other components that will be used.• Complete “Preparing for surround sound”. %1Select “DVD/6CH” as the input source.2Select "6CH INPT" by pressing the INPUT MODE key.3Start playback of the DVD software.4Adjust the volume.• It is not possible to adjust the volume level or sound quality (SETUP,SOUND, LISTEN MODE, ACTIVE EQ and TONE keys will not befunctional) of the channels separately when this model is in the6CH INPUT mode. Adjust the volume with the controls of the DVDplayer.For the powered subwoofer, you can adjust the volume of thesubwoofer using the subwoofer’s own volume control.0 ARENA : DSP Surround ARENA mode.- JAZZ CLUB : DSP Surround JAZZ CLUB mode.= THEATER : DSP Surround THEATER mode.~ STADIUM : DSP Surround STADIUM mode.! DISCO : DSP Surround DISCO mode.@ STEREO : Normal stereo playback.• Dolby Digital or DTS signal having more channels than the maximumnumber of playback channels available using this model’s currentsettings is input, downmixing is performed to match the number ofavailable channels.3Adjust the volume.Notes• Depending on the type of the signal or speaker setting, somelistening modes cannot be selected.• When playback is started, the sound may be cut or interruptedbefore the input source is confirmed as Dolby Digital.• To enjoy Dolby Digital surround (as well as all the other listeningmodes) from a single component, be sure to use a Dolby Digitalcompatible source component.Ambience effects