Kenwood KRF-V6030D Instruction Manual

Also see for KRF-V4530D: Instruction manual Instruction manual Instruction manual Service manual Service manual

Kenwood KRF-V6030D Instruction Manual Manual pdf 12 page image

12PreparationsConnecting the system controlSYSTEM CONTROL OPERATIONSLets you operate this unit with the system remote supplied with thereceiver.When you start playback from a source component, the input selectoron this unit switches to that component automatically.Lets you synchronize recording with the start of playback when record-ing from CD, MD or analog discs.Registering setup codes for KENWOOD audio components(KRF-V7030D/V6030D only)• Once you finish making the system connections, be sure to register theappropriate setup code for each component. 3• If you own remote controllable KENWOOD audio components that arenot compatible with system control, registering the setup code en-ables you to control those components using the remote controlsupplied with this unit (without connecting system control cords). Toregister setup codes for your remote controllable KENWOOD audiocomponents, see "Registering setup codes for other components".3Setting up the systemIf your component has the mode select switch, set the con-nected components to the [SL16] mode.SYSTEMCONTROLcord• In order to take advantage of the system control operations, thecomponents must be connected to the correct jacks. To use a CDplayer it must be connected to the CD jacks. To use a cassette deck(or MD recorder) it must be connected to the MD/TAPE jacks. Whenusing more than one CD player (etc.) only the one connected to thespecified jacks may be connected for system control.• Some CD players and cassette decks are not compatible with the[SL16] system control mode. Do not make system connections withequipment that is not [SL16] compatible.• Some MD players are not system control compatible. You cannotmake system control connections to this kind of equipment.Notes1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8]equipment for system operations. If your equipment consists of thiskind of combination, please do not connect any system control cords.Even without system control cords, normal operations can be carriedout without effecting performance.2. Do not connect system control cords to any components other thanthose specified by KENWOOD. It may cause a malfunction anddamage your equipment.3. Be sure the system control plugs are inserted all the way in to thesystem control terminals.The underlined portion represents the setting of the system controlmode.SYSTEM CONTROLcordSYSTEM CONTROL