14PreparationsSpeaker placementSubwoofer: Place to the front left and right of the listening position.Front speakers are required for all surround modes.: Place front and center. This speaker stabilizes the soundimage and helps recreate sound motion. Be sure to connect a centerspeaker when using the Dolby 3 Stereo mode.: Place to the direct left and right, or slightly behind,the listening position at even heights, approximately 1 meter above theears of the listeners. These speakers recreate sound motion andatmosphere. Required for surround playback.: Reproduces powerful deep bass sounds.FrontspeakerCenter speakerListeningpositionSurroundspeaker• Although the ideal surround system consists of all the speakers listedabove, if you don't have a center speaker or a subwoofer, you candivide those signals between the available speakers in the speakersettings steps to obtain the best possible surround reproduction fromthe speakers you have available. %Setting up the systemLoading the batteriesPreparing the remote control• Insert two AA-size (R6) batteries as indicated by the polarity markings.321Notes1. The supplied batteries may have shorter lives than ordinary batteries dueto use during operation checks.2. When the remote-controllable distance gets shorter than before, replaceboth batteries with new ones.3. Placing the remote sensor in direct sunlight, or in direct light from a highfrequency fluorescent lamp may cause a malfunction.In such a case, change the location of the system installation to preventmalfunction.Remote sensor6 m• When pressing more than one remote control key successively, pressthe keys securely by leaving an interval of 1 second or more betweenkeys.OperationWhen the indicator is lit, the power turns ON when you pressthe key on the remote control. When the power comes ON, pressthe key you want to operate.