Kenwood KRF-V6030D Instruction Manual

Also see for KRF-V4530D: Instruction manual Instruction manual Instruction manual Service manual Service manual

Kenwood KRF-V6030D Instruction Manual Manual pdf 22 page image

22OperationsPresetting radio stations manually• Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.• If you store a station at a previously used preset, the old station willbe replaced by the new one.Press the MEMORY key while receiving the station.3Blinks for 5 seconds Lights for 5 seconds12Tune to the station you want to store.34Receiving preset stationsEnter the number of the preset you want to receive (up to"40").120 50 0 )• If you make a mistake entering a two digit number, press the keyseveral times to return to the original display and start again.Use the MULTI CONTROL to select one of the stationpresets (1 – 40).Press the MEMORY key to accept the setting.Press TUNER to select the tuner as the source.AMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPAUTO SOUNDLFECS RSLSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSFMMHz STEREOAUTOTUNEDST.MEMOSWRLSP AAMkHzPRO LOGIC3DOWN MIXDIGITALS.DIRECTMONITORDSPAUTO SOUNDLFECS RSLSTI.VOLBCLIP MUTERDS EON PTYTP TA NEWSFMMHz STEREOAUTOTUNEDST.MEMOSWRLSP AListening to radio broadcastsThe RDS auto memory function assigns preset numbers to RDS stationsstarting from preset number "1". Therefore, be sure to execute the RDSauto memory function before using the following operations to manuallystore AM stations and other FM stations, and RDS stations.“Presetting RDS stations (RDS AUTO MEMORY)”. ¡TUNERRC-R0610 RC-R0510Numeric keysTUNERNumeric keysReceiving preset stations in order (P.CALL)• Each time you press the key, another preset station is received inorder.= = = = = = = = =¤+ + + + + + + + +12Press TUNER to select the tuner as the source.Use the P.CALL keys to select the desired station.TUNERRC-R0610 RC-R0510P.CALL ¤ / ‹TUNERP.CALL ¤ / ‹MULTI CONTROLKRF-V6030D/V5030D/V4530D MEMORY