Kenwood KRF-V7090D Instruction Manual

Also see for KRF-V7090D: Service manual

17 ENENGLISHPreparing for surround soundSpeaker settingsTo enable you to obtain optimum enjoyment from the receiver’s listeningmodes, make sure to complete the speaker settings (Subwoofer, Front,Center, Surround and Surround Back Speakers) as described below.SETUP MULTI CONTROLRECEIVER ONSETUP MULTI %/ fi,@/#SOUND1Turn on the power to this receiver by pressing the (POWERON/STANDBY) key or RECEIVER ON key.If you want to use the remote control unit, press the VIDEO 1,VIDEO 2, VIDEO 3, MD/TAPE, PHONO, AV AUX or TUNER key onthe remote control unit to set it to the receiver control mode.2Press the SETUP key to enter the SETUP mode.Use the keys or MULTI @/ #keys for the following displays.1 SP SETUP2 CROSSOVER3 TEST TONE4 SP DISTANCE5 LFE LEVEL6 DISP MODE7 EXITThe flow of the SETUP is as follows:Display SelectorDisplay ListenLFELEVELDISPMODEEXITFront LeftCenterFront RightSurround RightSurround Back RightSurround Back LeftSurround LeftSubwooferSPDISTANCEFREQ:40HzFREQ:60HzFREQ:80HzFREQ:100HzFREQ:120HzFREQ:150HzLCRSRSBRSLSBLSWLCRSRSBRSBLSLSWSPSETUPSubwooferFrontCenterSurroundSurroundBackSubwooferRe-mixTESTTONET. TONEMANUALT. TONEAUTOCROSSOVER3Select a speaker system.1 Select the SP SETUP and press the SETUP key again so thatthe subwoofer setting indication “SUBW ON” appears.LSL SB SRC RSP MUTEA B CLIPSWLFESTEREO2 Use the MULTI CONTROL knob or MULTI %/fi keys to selectthe appropriate subwoofer setting.1 SUBW ON : Subwoofer setting mode to the receiver is ON.2 SUBW OFF : Subwoofer setting mode to the receiver is OFF.• The initial setting is “SUBW ON”.• When the setting “SUBW OFF” is selected, the Front Speakersare automatically set to “FRNT LARGE” and the procedure skipsto step 6.• When Subwoofer output sound is required, select “FRNTNORMAL”, or select both “FRNT LARGE” and “SW RE-MIXON”.3 Press the ∧ key or MULTI # key to accept the setting.• The front speakers setting indication “FRNT” appears.LSL S SB SRC RSP MUTEA B CLIPSWLFESTEREO4 Use the MULTI CONTROL knob or MULTI %/fi keys to selectthe appropriate front speakers setting.1 FRNT NORMAL : Average size Front Speakers are con-nected to the receiver.2 FRNT LARGE : Large size Front Speakers are connectedto the receiver.5 Press the ∧ key or MULTI # key to accept the setting.• The Center Speaker setting indication “CNTR” appears.6 Use the MULTI CONTROL knob or MULTI %/fi keys to selectthe appropriate Center Speaker setting.If you selected “FRNT LARGE” as the Front Speakers setting,1 CNTR NORMAL : An average size Center Speaker is con-nected to the receiver.2 CNTR LARGE : A large size Center Speaker is connectedto the receiver.3 CNTR OFF : Center Speaker setting mode to the re-ceiver is OFF.If you selected “FRNT NORMAL” as the Front Speakerssetting,1 CNTR NORMAL : An average size Center Speaker isconnected to the receiver.2 CNTR OFF : Center Speaker setting mode to thereceiver is OFF.7 Press the ∧ key or MULTI # key again to accept the setting.• The Surround Speaker setting indication “SURR” appears.Continued to next page.