44Using ReceiverExecuting Several Operations at Once (Macro function)By registering several steps of remote control operations beforehand, theseoperations can be executed with a single operation. This function is re-ferred to as the macro function. The receiver can register up to three setsof macros. Up to 20 operation steps can be recorded for one macro.Registering a macro1. Press and hold the MACRO key on Remote Control unit for morethan 2 seconds.2. Within 8 seconds, press the MUSIC (MACRO1),MOVIE (MACRO2) or TV (MACRO3) key.3. Press the control keys in the order you want to executethem.4. Press the MACRO key. Now the registration is complete.5. Check the macro according to the following “Executing a macro”procedure.When there is a function which does not perform interim operation,a delay must be inserted. To insert a delay, insert a macro step for akey not related to the operation at that time (for example the STOPkey during stop) etc. befor the function for which the operation is tobe delayed.Press each key slowly and firmly.“Full” is displayed when the maximum number of steps have been regis-tered.If you do not perform any operation for more than 8 seconds in the middleof registration, the registration mode is canceled and the previous regis-tration remains without being cleared.Executing Several Operations at Once (Macro function)2WAY LCD REMOTE CONTROL UNIT45Using ReceiverExecuting Several Operations at Once (Macro function)Example of registration:In the following example, the steps for turning the TV on, turning theVCR on, setting the TV channel and playing the VCR will be registered inMacro 2.1. Press and hold the MACRO key on Remote Control unit for morethan 2 seconds.2. Within 8 seconds, press the MOVIE (MACRO2) key.3. Perform registration.1. Press the TV key.2. Press the AV POWER key.3. Press numeric key 2 (channel setting).4. Press the MOVIE key.5. Press the AV POWER key.6. Press the 3 key.4. Press and hold the MACRO key.Now the registration is complete.Executing a macro1. Press the MACRO key on Remote Control unit.2. Within 3 seconds, press the MUSIC (MACRO1), MOVIE (MACRO2)or TV (MACRO3) key.The registered macro will be executed.After macro execution, the LCD display returns to the previous condi-tion.