Kenwood KRF-X9080D Instruction Manual

Also see for KRF-X9080D: Service manual

21 ENENGLISH3 For optimum bass peak level, keep increasing the bass peaklevel by using the MULTI CONTROL knob or Multi (%/fi)keyswhile test tone is being output until clip sound is heard fromthe Subwoofer or Front Speaker.SP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXSWLFE4 Press the SETUP key to accept the setting.7Input the distance to the speakers.• Indicators appear only for the channels of the speakers selectedin step 4.1 Press the ∧∧∧∧∧/∨∨∨∨∨ keys or @/# keys to select the SP DISTANCEon setup displays and press the SETUP key again.2 Measure the distance from the listening position to each ofthe speakers.Jot down the distance to each of the speakers.Distance to Front Left Speaker (L) : ____ feet (meters)Distance to Center Speaker (C) : ____ feet (meters)Distance to Front Right Speaker (R) : ____ feet (meters)Distance to Surround Right Speaker (SR): ____ feet (meters)Distance to Surround Back Right Speaker(SBR): ____ feet (meters)Distance to Surround Back Left Speaker (SBL): ____ feet (meters)Distance to Surround Left Speaker (SL): ____ feet (meters)Distance to Subwoofer (SW) : ____ feet (meters)3 Use the ∧∧∧∧∧/∨∨∨∨∨ keys or @/# keys to select the speakers and theMULTI CONTROL knob or Multi (%/fi) keys to adjust thedistance to the Front Speakers.The speaker indicator to be adjusted blinks.LSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGIC LOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXSWLFE• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),adjustable in 1 foot (0.3 m) increments.4 Repeat steps 3 to input the distance for each of the speakers.5 Press the SETUP key again to return to main setup displays.• The speakers you have selected should appear on the display.Confirm that all the speakers have been correctly selected.8Adjust the LFE LEVEL (Low Frequency Effects).1 Press the ∧∧∧∧∧/∨∨∨∨∨ keys or @/# keys to select the LFE LEVEL andpress the SETUP key.2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjustthe LFE LEVEL.LSL S SB SRRSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXLFEPRO LOGIC3 Press the SETUP key again to return to main setup displays.Preparing for surround soundIndication in feet Indication in meters9Select the display mode.1 Press the ∧∧∧∧∧/∨∨∨∨∨ keys or @/# keys to select the DISP MODE.2 Press the SETUP key for the following displays:1 DISP SELECTOR : Displays the current input selector.2 DISP LISTEN : Displays the current listen mode.3 Use the MULTI CONTROL knob or Multi (%/fi) keys to selectthe display mode.SL S SB SRSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETE PRO LOGICNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXLFEL RDOLBY DIGITAL4 Press the SETUP key again to accept the setting.5 Use the ∧∧∧∧∧ key or # key to select EXIT.L RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXLFESL S SB SRPRO LOGIC6 Press the SETUP key to exit the SETUP mode.