Kenwood KRF-X9080D Instruction Manual

Also see for KRF-X9080D: Service manual

36 ENENGLISHPreparations• Connect your DVD player to the DVD/6CH jacks of the receiver.• Turn on all other components that will be used.• Complete “Preparing for surround sound”. (1Press “DVD/6CH” as the input source.2Select "6CH INPUT" by pressing the INPUT MODE key.• If speaker system B is on when “6CH INPUT” is selected as theinput source, it switches off and speaker system A turns onautomatically.3Start playback of the DVD software.4Adjust the volume.• It is not possible to adjust the volume level or sound quality (SETUP, SOUND, LISTEN MODE, ACTIVE EQ, SPEAKER EQ, STE-REO, DSP, LOUDNESS and TONE key will not be functional) ofthe channels separately when the receiver is in the 6CH INPUTmode. Adjust the volume with the controls of the DVD player.For the powered subwoofer, you can adjust the volume of thesubwoofer using the subwoofer’s own volume control.Convenient functionsDVD 6-channel playbackUsing a DVD player or the like equipped with six (5.1) output channels andthe receiver, you can enjoy surround sound playback.Connecting a DVD player which can decode the surround signal itself isalso acceptable.SoundListen Mode5/ ∞ Stereo(Multi %/ fi,@ / #)DimmerTUNERMULTI CONTROLDIMMERSTEREOSOUND LISTEN MODEINPUT MODEDVD/6CHVOLUMECONTROLInput ModeDVD/6CHVOL /Ambience effectsAdjusting the soundYou can make further adjustments to the sound while listening toplayback in the surround mode.1 For the remote control, press and hold the TUNER key for morethan 3 seconds to switch to receiver mode.2 Press the SOUND key and then use the ∧∧∧∧∧/∨∨∨∨∨ keys or @/# keysuntil the desired item appears in the display.Each time you press the ∧∧∧∧∧/∨∨∨∨∨ keys or @/# keys, the menuchanges as follows:Note that some items are not displayed in certain modes.1 CNTR (Center Speaker level adjustment)*2 SR (Right Surround Speaker level adjustment)*3 SBR (Surround Back Right Speaker level adjustment)*4 SBL (Surround Back Left Speaker level adjustment)*5 SL (Left Surround Speaker level adjustment)*6 SUBW (Subwoofer level adjustment)*7 INPUT (Input level adjustment - analog mode only) ™8 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital and DTSmode only)9 PANORAMA (Panorama mode ON/OFF )**0 DIMENSION (Dimension adjustment)**- CENTER WIDTH (Center width adjustment)**= DUAL MONO (Dual Mono selection - Dolby Digital mode only)* The adjustment is only temporary for the current input selection.The value will return automatically to the original setup value whenthe power is turned on/off or when the input selector is changed.** Pro Logic IIx Music and Pro Logic II Music mode only.3 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust thesetting as desired.• The adjustment item is displayed for approximately 20 seconds.