Kenwood KVT-925DVD Instruction Manual

Also see for KVT-925DVD: Service manual Service manual

Setup MenuDTA SetupManually set the sound output timing of eachchannel.(P50 6)DTA Setup screen1 Selects a speaker to be adjusted.2 Sets a delay time of the selected speaker.3 Stores the adjusted status in memory or calls itfrom memory.4 Returns to the Car Type Set Up screen.1 Center speaker2 Front speaker3 Rear speaker4 SubwooferSelect a speaker you wish to adjust2DTADisplay the DTA Setup screen1The speakers are virtually moved to the desireddistance.When the values of center speaker and frontspeakers increase, they are virtually moved forward.When the values of rear speakers and subwooferincrease, they are virtually moved backward.To store your setup in memoryContinue to touch more than 2 seconds.To call your setup from memoryYou can also call the setup from memory by touching7 on the Car Type Set Up screen.PresetPresetPresetStore or call your setup into/from memorySet a delay time3 Crossover Network SetupYou can manually set a crossover frequency ofspeakers.(P51 w)1 Sets a crossover frequency.2 Sets a crossover slope.3 Returns to the Speaker Set Up screen.4 Sets the phase of subwoofer output (it isdisplayed when the subwoofer crossoverfrequency is set).The phase is reversed 180 degrees when set to"Reverse".• When you select a speaker type from theSpeaker Setup screen, the crossoverfrequency setup is erased.• During crossover setup, the speaker type is setto "USER" on the Speaker Set Up screen.X'OverSpeaker Setup MemoryYou can store all of speaker and crossoversetup in memory simultaneously.To store your setup in memory(P51 q)Continue to touch more than 2 seconds.To call your setup from memory(P51 q)PresetPresetEnglishEnglish 5554 English232341NormalPhaseReturnFrequencyy18dB/OctSlope100Hz 1kHzLPF1 12 2 34ReturnPresetrontFFFFroFroFroron10cm110c10cDTADTADTADTAD2 2341