Kenwood KVT-925DVD Instruction Manual

Also see for KVT-925DVD: Service manual Service manual

English84 English English 85Sound Effects MenuZone ControlYou can set the front and rear audio source.Displaying the Zone ControlscreenZone Control screenZone Control1 Adjusts the volume.2 Returns to the Control screen of the previoussource.3 Calls the Setup Menu. (see page 49)4 Calls the Sound Effects Menu.5 Turns the Zone Function (that sets different sourcesounds for front and rear speakers) On or Off.When turned On, and are shown.6 Adjust the front and rear audio balance.(This button appears when the Zone function is On.)When the Zone function is turned On, this buttonappears on the all source control screen.7 Sets the front and rear audio source separately.(This button appears when the Zone function is On.)When the rear speaker sound is switched, theaudio source that is output at the AV OUTPUTterminal is also switched to the same source.However, if you have set the "Area" to "Reverse",the audio source that is output at the AV OUTPUTterminal is switched depending on the front soundsource.8 Switches the front and rear audio sources.(This button appears when the Zone function is On.)Use "Reverse" to change over the front and rearaudio sources.RearFrontReverseDVDRearRearFronArea1111456678732