Kenwood NX-200 Instruction Manual

Also see for NEXEDGE NX-200: Brochure Instruction manual Instruction manual Specifications Instruction manual

15MENU MODE (NX-200/ NX-300/ NX-200G/ NX-300G ONLY)Many functions on this transceiver are selected or configured throughthe Menu instead of physical controls. Once you become familiar withthe Menu system, you will appreciate the versatility it offers.MENU ACCESS1 Press the key programmed as Menu.• The category list is shown.• When there is only 1 category, the function list is shown(proceed to step 4).2 Press / to select a category item.• On keypad models, you can enter a category number directly.3 Press or to view the function list.4 Press / to select a function item.• On keypad models, you can enter a function number directly.5 Press or to set up the selected function item.• Press or # to return to the category list.6 Press / to select your desired setting.• For settings with more than 1 level, repeat steps 5 and 6.7 Press or to set the selected setting and exit Menu mode.• Press or # at any time to return to the previous display.• Press at any time to exit Menu mode.MENU CONFIGURATIONSome transceiver keys may already be programmed withfunctions listed in the Menu. Those functions can be accesseddirectly by pressing the key. All other functions can still beaccessed using the transceiver Menu. The following table liststhe available Menu items.Display Description2-TONE 2-tone ModeAUTO REPLY MSG Auto Reply Message ON/OFFAUTO TELEPHONE Auto TelephoneAUTO DIAL Autodial ModeAUTO DIAL PROG Autodial Programming ModeAUX AUX ON/OFFBROADCAST Broadcast ON/OFF