NX-700/700H44ADJUSTMENTControlsKMC-36ModularMIC jackKeypad[HOOK]Channel Up/Down key[PTT]Power switchVolume Up/Down keyProgrammable function keysPanel Test Mode■ Test mode operation featuresThis transceiver has a test mode. To enter test mode,press and hold the [ ] key while turning the transceiverpower ON. Before the transceiver enters test mode, thefrequency version information appears on the LCD mo-mentarily. Test mode can be inhibited by programming. Toexit test mode, turn the transceiver power OFF. The follow-ing functions are available in test mode.■ Key operationKey “FNC” not appears on the sub LCD displayFunction Display[ ] / [ ] Test CH up/down Channel No.[ ] / [ ] Volume up/down -[ ] Push: Squelch level upHold: Squelch offSquelch levelSquelch off: icon appears[ ] Wide/Narrow/Very narrowWide: “w”Narrow: “n”Very narrow: “v”[ ] Shift to panel tuning mode -[ ] Function on “FNC” appears on the subLCD display[ ] MSK 1200bps and 2400bps 2400bps: icon appears[ ] Test signaling CH up Signaling No.Key “FNC” not appears on the sub LCD displayFunction DisplayMicrophone key[PTT] Transmit -[0] to [9]and [A]to [D],[#], [ ]Use as the DTMF keypad.If a key is pressed duringtransmission, the DTMFcorresponding to the keythat was presses is sent.-Key “FNC” appears on the sub LCD displayFunction Display[ ] -[ ] Analog/NXDN Analog: “A”NXDN: “N”[ ] / [ ] Function off -[ ] - -[ ] LCD all lights LCD all point appears[ ] High power/Low power Low: icon appears[ ] Function off -[ ] Compander on/off On: icon appears[ ] Beat shift on/off On: icon appearsMicrophone key[PTT] Transmit[0] to [9]and [A]to [D],[#], [ ]Function off -• LED indicatorRed LED Lights during transmission.Green LED Lights when there is carrier.• Sub LCD indicator“FNC” Appears at function on.• LCD display in panel test modeAn SQ5 1- 1Channel No.An : Analog narrow modeAw : Analog wide modeNn : NXDN narrow modeNv : NXDN very narrow modeSub LCD display +25Signaling No.Main LCD displaySquelch level(Analog mode only)Temperature