Kenwood TH-78A Instruction Manual

Also see for TH-78A: Instruction manual Instruction manual Service manual Instructions Instruction manual

Page 20In combined CTCSS and DTSS modes, scanning stops when the proper CTCSS tone is received. Squelch willopen only if the DTSS signal matches when the scan stops. The transceiver is delivered from the factory in theTime Operated Scan mode.2 Scan operation cancelOperation band:Press any key except the MONI, LAMP, BAND, MHz, E.CHG, or MSG.Sub-band:Press the BAND key, then press the PTT switch.3 Scan OptionsThe following scan options are available:• Memory ScanScans through those memory channels that have data stored and that have not been locked out. This functionoperates only in the memory mode.• Band ScanScan proceeds over the entire band. This function operates only in the VFO mode. (page 21).• Programmable Band ScanThe scan range for this mode is specified in memory. (page 21)• MHz ScanScans over a 1 MHz range. (page 22)• VFO / Memory ScanProvides alternate scanning of the VFO and last used memory channel. (page 23)• CALL/VFO ScanProvides alternate scanning of the call channel and the VFO. (page 23)• CALL / Memory ScanProvides alternate scanning of the call channel and last used memory channel. (page 23)• V/M/C (VFO / Memory / CALL) ScanScans the VFO, the last memory channel used, and the call channel. (page 23)