8 MCP-4A MEMORY CONTROL PROGRAM (FOR USE WITH TH-D72A/E)TH-D72A/E CONTENTS 75MCP-4A allows selection of a bitmap image which appears on the transceiver display when thetransceiver’s power is turned on. Different images can be configured for GPS Only mode and forNormal mode.From the Edit pulldown menu select “Menu” > “Radio”. Click on the “Custom Start-up Screen“checkbox in “Power-on” or “GPS Logger”. Clicking the “Bitmap File” button activates a dialog box toopen a file. Select a bitmap file to be used.Writing the configuration data to the transceiver will change the power on bitmap image.The image used for the power-on bitmap must be a monochrome bitmap file with 120 pixels widthand 48 pixels height.Do the following procedure to enter the password for the Power-on Password function.From the Edit pulldown menu select “Menu” > “Radio”. In the Radio window, enter in the Passwordedit box a string of up to 6 characters consisting of alphanumerics 0 to 9 and A to D.Note: When the entry of the password is complete, click on the Power-on Password checkbox in this window to enable thePower-on Password function.8.5.7 Changing the Power-on Bitmap Image8.5.8 Configuring the Character String for the Power-on Password