Kenwood TK-2200L Service Manual

Also see for TK-2200L: Product brochure Instruction manual

TK-2200L191.BPF Wave (1)Center frequency Spectrum ANT Programming Adjust theAdjust Spectrum analyzer setting analyzer BPF Software: waveform asCenter-f : 162MHz KPG-88D shown to theSpan : 100MHz right.RBW : 100kHzVBW : 10kHzATT : 5dB(2)High-edge frequencySpectrum analyzer settingCenter-f : 174MHz(3)Low-edge frequencySpectrum analyzer settingCenter-f : 150MHz2.Sensitivity TEST CH: Low SSG ANT Check 12dB SINAD or moreCheck Center DVM[Wide] High OscilloscopeSSG output:–117 dBm(0.3μV) AF VTVMSSG MOD:3.0kHz[Narrow] TEST CH: CenterSSG output:–115 dBm(0.4μV)SSG MOD:1.5kHz3.SQL1 TEST CH: Center Programming Write Squelch open(Threshold) Low Software:Writing High KPG-88D[Wide] SSG output:–123 dBm(0.16μV)SSG MOD:3.0kHz[Narrow] TEST CH: CenterSSG output:–122 dBm(0.18μV)SSG MOD:1.5kHz4.SQL9 TEST CH: Center(Tight) LowWriting High[Wide] SSG output:–117 dBm(0.3μV)SSG MOD:3.0kHz[Narrow] TEST CH:CenterSSG output:–116 dBm(0.35μV)SSG MOD:1.5kHz5.BATT BATT terminal voltage:5.9V DVM ANT Write BATT terminaldetection BATT terminal voltage:5.9VWritingReceiver SectionItem Condition Measurement Adjustment Specifications/Test equipment Terminal Parts Method RemarkADJUSTMENTREF -6.7 dBmCENTER 162.0 MHz∗RBW 100 kHz ∗VBW 10 kHz ∗SWP 200 ms ATT 5 dBSPAN 100.0 MHz10dB/ A_Write Norm B_Blank NormCENTER162.0 MHzREF -6.7 dBmCENTER 174.0 MHz∗RBW 100 kHz ∗VBW 10 kHz ∗SWP 200 ms ATT 5 dBSPAN 100.0 MHz10dB/ A_Write Norm B_Blank NormCENTER174.0 MHzREF -6.7 dBmCENTER 150.0 MHz∗RBW 100 kHz ∗VBW 10 kHz ∗SWP 200 ms ATT 5 dBSPAN 100.0 MHz10dB/ A_Write Norm B_Blank NormCENTER150.0 MHz