Kenwood TK-2406 Instruction Manual

Also see for TK-2406: Service manual Instruction manual

Contents

THANK YOUWe are grateful you have chosen KENWOOD for your landmobile radio applications.NOTICES TO THE USER◆ Government law prohibits the operation of unlicensed radiotransmitters within the territories under government control.◆ Illegal operation is punishable by fine and/or imprisonment.◆ Refer service to qualified technicians only.Safety: It is important that the operator is aware of, andunderstands, hazards common to the operation of anytransceiver.Firmware CopyrightsThe title to and ownership of copyrights for firmware embedded in KENWOODproduct memories are reserved for JVC KENWOOD Corporation.PRECAUTIONS• Do not charge the transceiver and battery pack when they are wet.• Ensure that there are no metallic items located between thetransceiver and the battery pack.• Do not use options not specified by KENWOOD.• If the die-cast chassis or other transceiver part is damaged, do nottouch the damaged parts.• If a headset or headphone is connected to the transceiver, reducethe transceiver volume. Pay attention to the volume level whenturning the squelch off.• Do not place the microphone cable around your neck while nearmachinery that may catch the cable.• Do not place the transceiver on unstable surfaces.• Ensure that the end of the antenna does not touch your eyes.• When the transceiver is used for transmission for many hours, theradiator and chassis will become hot. Do not touch these locationswhen replacing the battery pack.• Do not immerse the transceiver in water.• Always switch the transceiver power off before installing optionalaccessories.• The charger is the device that disconnects the unit from the ACmains line. The AC plug should be readily accessible.