Kenwood TK-3118 Service Manual

Also see for TK-3118: Service manual

4TK-3118TK-260 :K, K23. How to enter each modeMODE PROCEDUREUser Mode Power ONSelf Programming [MONI] + [DIAL] + POWER ONMode (More than 2 sec)Wireless Clone mode [MONI] + [LOW] + POWER ON(More than 2 sec)PC Mode received commands from PC4. Self Programming modeAfter entering self-programming Mode, the radio allows 3types of operation:Function setting / Channel setting / All ResetWhen self-programming is disable through using the FPU, selfprogramming mode cannot be turned ON.1) Function settingYou can program 3 settings.Operation:After entering Self-Programming Mode Press the [SCAN] key.The LCD changes toIf your radio is programmed with the selective call function,the LCD changes to (1).When you press the PTT switch after setting the data, youcontinue to the next item. (Refer to page 7 item 5)Selecting the setting items Display Setting contents(Example)You can enter 3 digit code(000 to 999) using the DTMFkeys.This feature is available onlywhen "Selective Call" hasbeen activated in the radio.OFF: No, ON: YesThis item is selected usingthe channel selector.Setting the Selective CallCode (3 Digit)Setting the BEEP ON or OFFSetting the [MONI] KeyAssignment(000 0 )(ON 1 )(0 2 ) 0: Squelch OFF,1: Monitor Toggle,2: Monitor Momentary,OFF: OFFY o u c a n s e l e c t f r o mamong the above settings.This item is selected usingthe channel selector.3. 如何进入每一种模式REALIGNMENT/ 模式组合4. 自台编程模式进入自台编程模式后，手持机允许三类操作：功能设置/信道设置/全部复位当使用FPU设置禁止自台编程时，便不能进入自台编程模式。1) 功能设定您可编程三个设置。操作：进入自台编程模式后按[SCAN]键。LCD变为如果您的手持机编程选择呼叫功能，则LCD变为 (1)。当您在设置数据后按下PTT开关，您便可继续到下一个项目。（请翻阅7页项目5）000 0ON 1Item number(1) (2)or000 0ON 1(1) (2)模式类型操作步骤用户模式电源ON自台编程模式 [MONI]＋[DIAL]＋电源ON (高于2秒)无线复制模式 [MONI]＋[LOW]＋电源ON (高于2秒)计算机模式从计算机接收指令选择设置项目显示设置内容(例如)您可使用DTMF键输入3位代码（000-999）。只有当 “ 选择呼叫功能”已在手持机中设定有效时该功能才可用。OFF: 否, ON: 是该项目通过使用信道选择器来选择。设置选择呼叫编码。(3位数字)设置峰鸣声ON或OFF设置监听[MONI]按键赋值(000 0 )(ON 1 )(0 2 ) 0: 静噪关闭，1: 监听器触发,2: 监听器瞬时,OFF: 关您可从上述设置中选择。该项目使用信道选择器选择。