Kenwood TK-3148 Service Manual

Also see for TK-3148: Service manual

Contents

TK-314852-3. Key functionsTrunking mode2 Rotary encoderRotate this encoder to select your desired call address(voice calls/dialing) or status (status calls).4 Transmit indicatorLights red while transmitting.5 Auxiliary (orange) key (default setting: None)Press to activate its auxiliary function.8 PTT (Push-To-Talk) switchPress to transmit. Also press to initiate a call if “PTT toInitiate Call” has been programmed.9 Side 1 key (default setting: Clear)Press to activate its auxiliary function.0 Side 2 key (default setting: Call)Press to activate its auxiliary function.- S key (default setting: Status/ Stack)Press to activate its auxiliary function.= A key (default setting: Function Menu)Press to activate its auxiliary function.~ 2 B key (default setting: Conventional)Press to activate its auxiliary function. Also press to scrollleft while viewing stack entries.! C 3 key (default setting: Scan)Press to activate its auxiliary function. Also press to scrollright while viewing stack entries.Conventional mode2 Rotary encoderRotate this encoder to select your desired channel.4 Transmit/ Receive indicatorLights green while receiving a signal. Lights red whiletransmitting.8 PTT (Push-To-Talk) switchPress this switch, then speak into the microphone to call astation.9 Side 1 keyPress to return to Trunking mode.0 Side 2 keyPress to turn the monitor function ON in order to monitoryour selected channel.- S keyPress to turn the display and keypad backlight ON.The backlight remains ON for 5 seconds.= A keyPress to add/delete channel(s) to/from Scan list.! C 3 keyPress to turn Scan ON (or OFF).OPERATING FEATURES / 操作特性2-3.键功能集群模式2 旋转编码器旋转本编码器选择您所需要呼叫的地址 (语音呼叫/拨号) 或者状态代码 (用于状态呼叫) 。4 发射指示灯在发射中点亮红色。5 辅助 (橙黄色) 键 (初始设定: 无)按下可开启该辅助功能。8 PTT (按讲) 开关按下可发射。当编程了“按 PTT 开始呼叫”后，也可按下开始呼叫。9 侧面 1 键 (初始设定: 清除)按下可开启该功能。0 侧面 2 键 (初始设定: 呼叫)按下可开启该功能。- S 键 (初始设定: 状态/堆栈)按下可开启该功能。= A 键 (初始设定: 功能选单)按下可开启该功能。~ B 键 (初始设定: 常规)按下可开启该功能。当观察堆栈条目时，按下可向左侧滚动。! C 键 (初始设定: 扫描)按下可开启该功能。当观察堆栈条目时，按下可向右侧滚动。常规模式2 旋转编码器旋转本编码器选择您所需要的信道。4 接收指示灯在接收信号时点亮绿色。在发射中点亮红色。8 PTT (按讲) 开关按下该开关，然后对着麦克风讲话呼叫其他电台。9 侧面 1 键按下可恢复到集群模式。0 侧面 2 键按下可接通监听功能来监听您所选择的信道。- S 键按下可开启显示屏和键盘背景照明。背景照明将保持 5 秒钟。= A 键按此键可向扫描序列中添加信道或从扫描序列中删除信道。! C 键按下可启动扫描 (或者停止扫描)。