Kenwood TK-390 Service Manual

Also see for TK-390: Brochure & specs Quick guide Instruction manual Service manual Service manual

Contents

12TK-3903-2. Channel Setting ModeSet data for each channel while in this mode. After firstentering Self programming mode, select the "CHAN" displaywith [Top 1] [Top 2] and press [PTT] to set Channel Settingmode. Once in Channel Setting mode, select the group thatneeds setting with the [Top 1] [Top 2] keys and press [PTT].Next select the channel for setting with the [Top 1] [Top 2]keys and press [PTT]. The setting items and setting data willthen appear so reset the data with the [Top 1] [Top 2] keysand press [PTT]. When finished, the display shifts to thenext setting item. After finished setting all items press[PTT] to return to Group selection. Changes in the fre-quency CH steps and the QT/DQT steps can be made in[Side 1].No. Function name Display RemarksSelect 1.–1 during 1–160~160–1Group/Channel group selection1–1. duringchannel selection1 RX frequency R450.0125 Receive frequency(Dot on right edge islit up during 6.25kHzsteps)2 RX signalling RX 023N Receive QT/DQT(Dot on right edge islit up during 1 stepchanges)3 TX frequency T450.0125 Transmit frequency(Dot on right edge islit up during 6.25kHzsteps)4 TX signalling TX 250.3 Transmit QT/DQT(Dot on right edge islit up during 1 stepchanges)5 Option signalling 2ToneA OFF, DTMF, 2ToneA,2ToneB, 2ToneC6 DEL/ADD D/A ADD Delete, Add7 Wide/Narrow WIDE Wide. Narrow8 PTT ID ID OFF OFF, ON9 TX power POW HI High, Low10 Busy channel lockout BCL OFF OFF, ON11 Beat shift SFT OFF OFF, ON• Operation1. Select the setting value with the [Top 1] [Top 2] keys.2. Press the [PTT] and the selected value is backed up andoperation shifts to the next item for setting.3. Press [Side 2] on the Group selection screen in order toreturn to Self programming mode.• Note1. Different sample displays are shown.2. Setting item No.s are displayed with a 7-segment 2-digitfigure on the LCD.3. Self programming mode cannot be set when set toDisaable with the FPU.4. A red LED lights up during TX frequency and TX signal-ling.5. Press [Orange] on the TX, RX frequencies setting screenin order to clear in the channel frequencies data.6. Press [Orange] on the signalling setting screen in order tochange or off the signalling function.7. Flipping [Toggle] to the right during setting of RX, TX fre-quencies and performing Up/Down operation allows fre-quencies to be changed in MHz steps.8. The RX and TX frequencies can be entered with the num-ber pad keys.• Flow ChartSelf programming modeChannel setting modeGroup selectionChannel selection1. RX frequency2. RX signalling3. TX frequency4. TX signalling5. Option signalling6. Scan Delete/Add7. Wide/Narrow8. PTT ID on/off9. TX power Hi/Low10. Busy channel lockout on/off11. Beat shift on/off[Top 1] [Top 2][PTT][PTT][PTT][PTT][PTT][PTT][PTT][PTT][PTT][PTT][PTT][PTT][PTT][PTT][Side 2][Side 2][Side 2][Side 2][Side 2][Side 2][Side 2][Side 2][Side 2][Side 2][Side 2][Side 2][Side 2][Side 2]Orange OrangeOrangeOrange OrangeOFFDQT I DQT NQTOrange OrangeOrangeOrange OrangeOFFDQT I DQT NQTREALIGNMENT