Kenwood TK-7160 Modification Information

Also see for TK-7160: Instruction manual Service manual Specifications Brochure & specs Service manual

Contents

2 CONNECTING OPTIONAL DEVICES30 CONTENTS Confidential MOD (K)/Ver. 2.007. Dress the cables soldered to the Scrambler Boardas shown in the following figure.Note: The speaker cable wires must be positioned under theScrambler cables. Scrambler cables should not be dressed between the shieldingcover and PCB.8. Reassemble the shielding plate, and re-install thescrews and packing.2.8.2 Configuration using KPG-99DANI Board information can be written to the transceiverby using KPG-99D after installing the board in thetransceiver. Follow the procedure below to write ANIBoard information to the transceiver.1. Run KPG-99D.2. Select the Program pulldown menu > “Read Datafrom the Transceiver”. The “ ” icon in the tool barcan be clicked to read data from the transceiver.The Read Data from the Transceiver dialog boxappears on the display.Figure 2-20 Read Data from the Transceiver Dialog Box 13. Click the “Read” button.KPG-99D starts reading configuration data from thetransceiver.Figure 2-21 Read Data from the Transceiver Dialog Box 24. Select the Edit pulldown menu > “Function Port”.The Function Port window appears on the display.Figure 2-22 Function Port Window 15. Select the External Devices (Port 3 to 8)dropdown list > “Scrambler”.Refer to the instruction manual supplied with theScrambler Board for instructions on how toconfigure the Scrambler Board.Figure 2-23 Function Port Window 2Keep scramblerwiring away fromshielding cover.Speaker wire cablebelow scramblerwiring