Kenwood TK-7185 Instruction Manual

Also see for TK-7185: Service manual addendum Instruction manual

Contents

2cAll diSplAySThe following messages may appear on the display under certain circumstances:•ENGAGED: The called party is in another call.•HOLDING: The transceiver is confirming the call made by the base station.•INVALID: You entered an invalid call address.•NU: The called party could not be reached (Number Unobtainable).•NO REPLY: The called party has been called, but they did not respond to thecall.•PARTY BUSY: The called party is temporarily prohibited from making calls.•QUEUED: All communication channels are currently in use; your call will beconnected when a channel becomes free.viewing The STAcK1 Press the Status/ Stack key (default is the S key) twice to enter the stack.• If there is no data in the stack, “————————————” appears on the maindisplay and “–00” appears on the sub-display.2 Press the and keys to view the stack entries.• “NEW” momentarily appears on the sub-display if the message has not yet beenviewed.• In the sub-display, “S” represents a status stack entry, “V” represents a voice stackentry, and “D” represents a data stack entry.3 Press the and C> keys to scroll through the selected entry, to view theentire entry. Press the A key to toggle between the time/date of the receivedcall and the caller ID.4 To erase an entry, select the desired entry and press the Clear key.• “DELETE?” appears on the display. Press the S or key to confirm the deletion.Press the A or # key to cancel.5 To erase all entries, press and hold the Clear key.• “DELETE?” appears on the main display and “ALL” appears on the sub-display.Press the S or key to confirm the deletion. Press the A or # key to cancel.