Kenwood TK-7185 Instruction Manual

Also see for TK-7185: Service manual addendum Instruction manual

Contents

3cAll diverTing■ diverTing your own cAllS1 Enter control code 41 to divert your calls to a different transceiver.2 Press the key, then enter the ID number of the unit to where you wantyour calls diverted.3 Press the PTT switch, the Call key, or the # key to set up the call diversion.• “CALLING” appears on the display.• When the call divert is set, “COMPLETE” momentarily appears on the display.Additionally, the icon appears on the display and flashes.4 To end the call diversion, enter control code #41, then press the PTTswitch, the Call key, or the # key.• “CALLING” appears on the display.• When the call divert is cleared, “COMPLETE” momentarily appears on thedisplay.■ diverTing Third pArTy cAllS1 Enter control code 44 to divert third party calls.2 Press the key, then enter the ID number of the unit from which you wantcalls diverted.3 Press the key, then enter the ID number of the unit to where you want thecalls diverted.4 Press the PTT switch, the Call key, or the # key to set up the call diversion.• “CALLING” appears on the display.• When the call divert is set, “COMPLETE” momentarily appears on the display.5 To end the call diversion, enter control code #44 followed by the key andthe ID number of the unit from which calls are being diverted, then pressthe PTT switch, the Call key, or the # key.• “CALLING” appears on the display.• When the call divert is cleared, “COMPLETE” momentarily appears on thedisplay.diAling modePress the key programmed as Dialing Mode to enter a dialing number using thekeypad.Note: You can select Dialing Mode when Keypad Operation is set to Programmable.